Hoover Washing Machine Error E18
⚡ Quick Answer: The E18 error code on your Hoover washing machine indicates a drainage system failure. This issue often results in the washing machine stopping mid-cy... ✅ DIY Fixable
What Does Error E18 Mean?
The E18 error code on your Hoover washing machine indicates a drainage system failure. This issue often results in the washing machine stopping mid-cycle and is typically accompanied by the E18 error displayed on the screen. The problem could be due to a blockage or failure in the drain pump, preventing water from draining properly. To resolve this, check the drain pump filter for clogs and inspect the drain hose for any obstructions.
Common Symptoms:
- Washing machine stops mid‑cycle
- Water not draining
- E18 displayed or blinking LED pattern
Possible Causes
- Drain pump blockage or failure (medium)
- Poor pump feedback signal to control electronics (low)
How to Fix Error E18
DIY Fix Basic checks for E18 drainage error
- Turn off and unplug the washer.
- Check and clean the drain pump filter (if accessible).
- Inspect the drain hose for kinks or blockages and clear any debris.
- Run a drain/spin cycle to see if draining resumes.
Technician Only Professional drain pump inspection and service
- Disconnect power and access the drain pump assembly.
- Inspect the pump impeller for debris or damage.
- Test the pump motor and wiring for continuity.
- Replace the drain pump if faulty.
- Verify pump feedback to the control board.
- Test wash cycle to confirm resolution.
Parts needed: Drain pump assembly, Possible wiring harness or connectors
- Water remains after drainage attempts and E18 persists
- Drain pump removal or electrical tests are required
- Signs of water leaks or electrical faults
Next step
Choose the next step for E18
Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.
Most relevant component to inspect
Drain Pump
Pumps waste water out of the appliance during the drain cycle.
- Typical part-only price
- $35 - $80
- DIY difficulty
- Easy
- Estimated time
- 15-30 mins
Where can I find the model number?
Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.
Verify the complete model and part number on the retailer's compatibility page before ordering.
Other parts options
Check related components first; use model search as a fallback.
Wiring Harness
Connects controls, sensors, motors, and other electrical components inside the appliance.
Model-compatible Washing Machine parts
Enter the complete model number to browse compatible replacement parts. This is a model-based parts search, not a diagnosis that a specific component failed.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.
Optional routine care
Maintenance supplies
These products support cleaning or routine upkeep. They are separate from the possible repair components above and are not claimed to fix this error code or symptom.
Washing Machine Cleaner Tablets
Routine tub-cleaning supplies for residue and odor control. They do not repair a mechanical, drainage, or electronic fault.
Braided Washer Inlet Hoses
A maintenance replacement option for visibly worn external fill hoses. Verify thread size, length, and hot/cold connection requirements.
Washer Drain Hose Holder
Helps secure an external drain hose at the standpipe. It does not correct an internal pump or control fault.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. Recommendations are based on routine-care relevance, not commission rate.
Technical Specifications
| note | The previous model-independent part specification was removed. Verify the full model number and diagnosis in the manufacturer's official parts catalog before ordering. |
|---|---|
| part_number | None |
Common Questions
What does E18 error mean on Hoover washing machine?
E18 indicates a drainage system failure, causing the machine to stop mid-cycle and display the error.
Can I fix Hoover washing machine E18 error myself?
Yes, you can check and clean the drain pump filter and inspect the drain hose for blockages.
How much does it cost to fix E18 error?
Repair costs for the E18 error range from $80 to $200, depending on the region and model.
When should I call a technician for E18?
Call a technician if water remains after drainage attempts, or if electrical tests or pump removal are needed.
Data last verified: 2026-07-31
User Comments (0)
Share your experience or solution below.
Please login to post a comment.
Be the first to comment!