Hoover Washing Machine Error E17

⚡ Quick Answer: The Hoover washing machine error E17 indicates a malfunction related to the motor tachometer, which monitors the motor speed. This often results in th... ⚠️ Difficulty Varies

What Does Error E17 Mean?

The Hoover washing machine error E17 indicates a malfunction related to the motor tachometer, which monitors the motor speed. This often results in the machine failing to fill with water or complete its wash cycle. Symptoms include abnormal drum spinning speeds, inconsistent motor behavior, and potential noise issues. Addressing E17 may require inspecting the motor tachometer, wiring connections, or control board communication.

Common Symptoms:

  • Machine stops during wash or won’t complete cycle with E17 displayed.
  • Drum fails to spin normally or speed is incorrect.
  • Noisy or inconsistent motor behavior when attempting to start.

Possible Causes

  • Faulty motor tachometer/speed sensor (medium)
  • Loose or damaged wiring between tachometer and control board (medium)
  • Control board communication with tachometer is disrupted (low)

How to Fix Error E17

DIY Fix Basic checks before repair

  1. Turn off and unplug the washing machine completely.
  2. Allow the machine to sit for a few minutes then plug it back in and try restarting — occasionally transient faults clear.
  3. Ensure no heavy overloading of the drum which can make the motor struggle at start.

Technician Only Inspect and repair motor tachometer and wiring

  1. Disconnect power to the washing machine.
  2. Access the motor and control board area.
  3. Inspect wiring harness between the motor tachometer/speed sensor and the main control board for looseness, damage, corrosion, or broken connectors.
  4. Test the tachometer/speed sensor for proper resistance and signal output per model specifications.
  5. Replace the tachometer/speed sensor if defective.
  6. If wiring and sensor test OK but error persists, evaluate the main control board’s tachometer interface and replace if needed.

Parts needed: Motor tachometer/speed sensor, Wiring harness/connectors, Control board (if necessary)

🛑 When to Call a Pro:
  • If you are not comfortable accessing internal wiring or electronics.
  • If after wiring and sensor checks the error remains.
  • If the machine exhibits additional symptoms (burn smells, excessive noise).

Technical Specifications

wattage 100W
component Water Inlet Valve
resistance 500-1500 ohms
part_number HWDV1001
voltage_rating 220V AC

Common Questions

What does E17 error mean on Hoover washing machine?

E17 indicates a fault with the motor tachometer, affecting speed monitoring and operation.

Can I fix Hoover washing machine E17 error myself?

Yes, you can check wiring and reset the machine, but deeper issues may require professional help.

How much does it cost to fix E17 error?

Repair costs for E17 range from ¥8,000 to ¥30,000+, depending on parts and labor.

When should I call a technician for E17?

Call a technician if you're uncomfortable with electrical components or if problems persist after basic checks.

Data last verified: 2026-04-14

User Comments (0)

Share your experience or solution below.

Be the first to comment!