Hoover Washing Machine Error E16
⚡ Quick Answer: The Hoover washing machine error E16 indicates a fault in the water heating system, specifically involving the heating element or its circuitry. This ... ✅ DIY Fixable
What Does Error E16 Mean?
The Hoover washing machine error E16 indicates a fault in the water heating system, specifically involving the heating element or its circuitry. This error typically occurs when the machine fails to heat water during the wash cycle, which can prevent the cycle from completing. Users may notice the error code displayed when the washing machine reaches the heating stage, and there could be unusual clicking sounds or even tripped electrics when the heater engages.
Common Symptoms:
- Error code E16 displayed on control panel when heating water stage is reached.
- Machine may fail to complete wash cycle due to inability to heat water.
- Possible tripping of house electrics or blown fuse when heater engages.
Possible Causes
- Faulty or failed heating element (medium)
- Poor heating element wiring or connectors (medium)
How to Fix Error E16
DIY Fix Basic verification and safety preparation
- Unplug the washing machine from mains power before inspecting any parts.
- Check that the error occurs at the heating/water temperature stage of a cycle.
Technician Only Inspect and replace heating element
- Access the heater assembly via the back panel and disconnect water and power.
- Use a multimeter to measure heating element resistance.
- Replace the element if the measurement is outside normal range or if visible damage is present.
- Reassemble and test the machine for normal operation.
Parts needed: heating element, heater grommet/seal
- If the E16 persists after replacing the heating element and checking wiring.
- If internal electronic control board faults are suspected.
- If uncomfortable performing electrical diagnostics.
Next step
Choose the next step for E16
Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.
Most relevant component to inspect
Heating Element
Heats the water or air inside the appliance to the required temperature.
- Typical part-only price
- $40 - $95
- DIY difficulty
- Medium
- Estimated time
- 30-45 mins
Where can I find the model number?
Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.
Verify the complete model and part number on the retailer's compatibility page before ordering.
Other parts options
Check related components first; use model search as a fallback.
Model-compatible Washing Machine parts
Enter the complete model number to browse compatible replacement parts. This is a model-based parts search, not a diagnosis that a specific component failed.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.
Optional routine care
Maintenance supplies
These products support cleaning or routine upkeep. They are separate from the possible repair components above and are not claimed to fix this error code or symptom.
Washing Machine Cleaner Tablets
Routine tub-cleaning supplies for residue and odor control. They do not repair a mechanical, drainage, or electronic fault.
Braided Washer Inlet Hoses
A maintenance replacement option for visibly worn external fill hoses. Verify thread size, length, and hot/cold connection requirements.
Washer Drain Hose Holder
Helps secure an external drain hose at the standpipe. It does not correct an internal pump or control fault.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. Recommendations are based on routine-care relevance, not commission rate.
Technical Specifications
| note | The previous model-independent part specification was removed. Verify the full model number and diagnosis in the manufacturer's official parts catalog before ordering. |
|---|---|
| part_number | None |
Common Questions
What does E16 error mean on Hoover washing machine?
E16 indicates a fault in the water heating system, often related to the heating element.
Can I fix Hoover washing machine E16 error myself?
Yes, you can check the heating element and its wiring after ensuring the machine is unplugged.
How much does it cost to fix E16 error?
Repair costs for parts range from £15 to £50, while labor costs may vary.
When should I call a technician for E16?
Contact a technician if the error persists after replacing the heating element or if you suspect control board faults.
Data last verified: 2026-07-31
User Comments (0)
Share your experience or solution below.
Please login to post a comment.
Be the first to comment!