Hoover Washing Machine Error E14
⚡ Quick Answer: The Hoover washing machine E14 error code indicates a malfunction in the door lock mechanism, often paired with the machine not starting or the door n... ✅ DIY Fixable
What Does Error E14 Mean?
The Hoover washing machine E14 error code indicates a malfunction in the door lock mechanism, often paired with the machine not starting or the door not locking properly. It can also be related to issues in the heating circuitry, temperature sensor, or control electronics, leading to cold washes or the machine stopping mid-cycle.
Common Symptoms:
- Error E14 displayed on the washing machine panel or LED indicator
- Wash cycles remaining cold or water not heating
- Machine halting mid-cycle
Possible Causes
- Heating element malfunction or failure (medium)
- Temperature sensor (NTC) or associated wiring fault (medium)
- Control board / PCB fault affecting heating control (medium)
How to Fix Error E14
DIY Fix Basic checks and power reset
- Turn off and unplug the washing machine from the mains.
- Wait a few minutes and plug it back in to power cycle the appliance.
- If the machine has been displaying cold washes, try a wash cycle with no load to see if heating occurs.
Technician Only Diagnostic and component verification
- Test the heating element resistance and continuity with a multimeter.
- Inspect the NTC temperature sensor and associated wiring for continuity and correct resistance values per service manual.
- Check connections to the main control board, and assess the PCB for burnt components or faults.
- Replace the faulty heating element, NTC sensor, or control board as indicated by testing.
Parts needed: Heating element, NTC temperature sensor, Control electronics / PCB
- If basic user‑level checks do not clear the error
- If electrical component testing is required
- If there is visible damage to wiring or PCB
Next step
Choose the next step for E14
Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.
Most relevant component to inspect
Heating Element
Heats the water or air inside the appliance to the required temperature.
- Typical part-only price
- $40 - $95
- DIY difficulty
- Medium
- Estimated time
- 30-45 mins
Where can I find the model number?
Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.
Verify the complete model and part number on the retailer's compatibility page before ordering.
Other parts options
Check related components first; use model search as a fallback.
Temperature Sensor
Monitors the internal temperature to ensure correct operation and prevent overheating.
Main Control Board
The central brain of the appliance that controls all components, cycles, and timings.
Model-compatible Washing Machine parts
Enter the complete model number to browse compatible replacement parts. This is a model-based parts search, not a diagnosis that a specific component failed.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.
Optional routine care
Maintenance supplies
These products support cleaning or routine upkeep. They are separate from the possible repair components above and are not claimed to fix this error code or symptom.
Washing Machine Cleaner Tablets
Routine tub-cleaning supplies for residue and odor control. They do not repair a mechanical, drainage, or electronic fault.
Braided Washer Inlet Hoses
A maintenance replacement option for visibly worn external fill hoses. Verify thread size, length, and hot/cold connection requirements.
Washer Drain Hose Holder
Helps secure an external drain hose at the standpipe. It does not correct an internal pump or control fault.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. Recommendations are based on routine-care relevance, not commission rate.
Technical Specifications
| note | The previous model-independent part specification was removed. Verify the full model number and diagnosis in the manufacturer's official parts catalog before ordering. |
|---|---|
| part_number | None |
Common Questions
What does E14 error mean on hoover washing machine?
E14 indicates a door lock malfunction or issues with heating components, causing the machine to not start or wash cold.
Can I fix hoover washing machine E14 error myself?
Yes, try power cycling the machine and running an empty wash cycle to test for heating.
How much does it cost to fix E14 error?
Repair costs range from £50 to £250+, depending on parts and service location.
When should I call a technician for E14?
Call a technician if basic checks fail, or if you need electrical component testing or see visible damage.
Sources & References
Data last verified: 2026-07-31
User Comments (0)
Share your experience or solution below.
Please login to post a comment.
Be the first to comment!