Hoover Washing Machine Error E08
⚡ Quick Answer: The Hoover washing machine error E08 indicates a malfunction related to the drain pump or motor components. This issue often manifests as the machine ... ✅ DIY Fixable
What Does Error E08 Mean?
The Hoover washing machine error E08 indicates a malfunction related to the drain pump or motor components. This issue often manifests as the machine failing to spin, leaving clothes wet after a wash, and producing unusual noises during the spin cycle. Common causes include an overloaded drum causing strain on the motor, worn motor carbon brushes, or faults in the motor speed sensor. Addressing these issues promptly can help restore normal function.
Common Symptoms:
- Machine fails to spin or stops mid‑cycle
- Clothes remain wet after a wash
- Unusual noise during spin cycle
- Error displayed after heavy load
Possible Causes
- Overloaded drum causing motor strain (high)
- Worn motor carbon brushes (medium)
- Faulty motor speed sensor or motor malfunction (medium)
How to Fix Error E08
DIY Fix Check load size
- Turn off the washing machine.
- Remove excess clothes to lighten the load.
- Restart the machine and run a spin cycle to see if the error clears.
Technician Only Inspect and replace motor brushes
- Disconnect the machine from mains power.
- Remove the back panel to access the motor.
- Disconnect motor wiring and remove the drive belt.
- Remove and inspect motor carbon brushes; replace if worn.
- Reassemble components and test operation.
Parts needed: motor carbon brushes
Technician Only Test motor speed sensor and motor
- Disconnect the machine from power.
- Access the motor and motor speed sensor.
- Use a multimeter to test sensor and motor for continuity/signal.
- Replace the motor speed sensor or motor if faulty.
Parts needed: motor speed sensor, washing machine motor
- If error persists after reducing load and basic checks
- If electrical wiring appears damaged
- If motor replacement is required and user lacks tools/experience
Next step
Choose the next step for E08
Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.
Most relevant component to inspect
Drain Pump
Pumps waste water out of the appliance during the drain cycle.
- Typical part-only price
- $35 - $80
- DIY difficulty
- Easy
- Estimated time
- 15-30 mins
Where can I find the model number?
Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.
Verify the complete model and part number on the retailer's compatibility page before ordering.
Other parts options
Check related components first; use model search as a fallback.
Drain Hose
Carries waste water from the drain pump to your home's standpipe or sink drain.
Model-compatible Washing Machine parts
Enter the complete model number to browse compatible replacement parts. This is a model-based parts search, not a diagnosis that a specific component failed.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.
Optional routine care
Maintenance supplies
These products support cleaning or routine upkeep. They are separate from the possible repair components above and are not claimed to fix this error code or symptom.
Washing Machine Cleaner Tablets
Routine tub-cleaning supplies for residue and odor control. They do not repair a mechanical, drainage, or electronic fault.
Braided Washer Inlet Hoses
A maintenance replacement option for visibly worn external fill hoses. Verify thread size, length, and hot/cold connection requirements.
Washer Drain Hose Holder
Helps secure an external drain hose at the standpipe. It does not correct an internal pump or control fault.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. Recommendations are based on routine-care relevance, not commission rate.
Technical Specifications
| note | The previous model-independent part specification was removed. Verify the full model number and diagnosis in the manufacturer's official parts catalog before ordering. |
|---|---|
| part_number | None |
Common Questions
What does E08 error mean on Hoover washing machine?
E08 indicates a malfunction in the drain pump or motor, causing the machine to fail to spin and leaving clothes wet.
Can I fix Hoover washing machine E08 error myself?
Yes, check the load size, remove excess clothes, then restart the machine and run a spin cycle.
How much does it cost to fix E08 error?
Estimated repair costs range from $10 to $40 for parts like motor carbon brushes.
When should I call a technician for E08?
Call a technician if the error persists after basic checks or if motor replacement is needed.
Sources & References
Data last verified: 2026-07-31
User Comments (0)
Share your experience or solution below.
Please login to post a comment.
Be the first to comment!