Gorenje Washing Machine Error F8
⚡ Quick Answer: The gorenje washing machine F8 error indicates a motor or drive fault where the drum fails to reach the expected spin speed during the spin cycle. Thi... ✅ DIY Fixable
What Does Error F8 Mean?
The gorenje washing machine F8 error indicates a motor or drive fault where the drum fails to reach the expected spin speed during the spin cycle. This often results in the drum spinning slowly or not completing the cycle. Common causes include issues with the drive motor, motor speed sensor, or drive belt. Regular maintenance and checks can help identify these faults early.
Common Symptoms:
- Error appears during or at the start of spin cycle rather than during wash
- Drum spinning slowly or not reaching set rotational speed
- Cycle stops or fails to complete spin
Possible Causes
- Drive motor fault (e.g., worn brushes, internal failure) (medium)
- Issues with motor speed sensor / tachometer (medium)
- Drive belt slack, damage, or misalignment (medium)
- Control board / inverter card issue affecting motor control (medium)
How to Fix Error F8
DIY Fix Basic Checks Before Repair
- Turn off and unplug the washing machine.
- Check for visible obstructions in the drum that might impede rotation.
- Ensure the load is balanced and not overly heavy.
- Try restarting the machine to see if the error clears.
Technician Only Inspect Motor and Drive Components
- Verify drum free rotation manually with the machine off.
- Check drive belt for wear, tension, or displacement; replace or adjust if necessary.
- Test motor brushes for wear and replace if worn.
- Inspect motor speed sensor (tachometer) and wiring for faults.
- Check inverter/control board connections and functionality; replace defective parts if needed.
Parts needed: Drive belt, Motor brushes, Motor speed sensor/tachometer, Inverter card / control board
- If the machine continues to show F8 after basic load balancing and restart
- If there is unusual noise, burning smell, or visible damage to motor/drive components
Next step
Choose the next step for F8
Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.
Most relevant component to inspect
Drive Belt
Transfers rotational power from the motor to turn the drum or tub.
- Typical part-only price
- $15 - $35
- DIY difficulty
- Easy
- Estimated time
- 20-30 mins
Where can I find the model number?
Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.
Verify the complete model and part number on the retailer's compatibility page before ordering.
Other parts options
Check related components first; use model search as a fallback.
Main Control Board
The central brain of the appliance that controls all components, cycles, and timings.
Model-compatible Washing Machine parts
Enter the complete model number to browse compatible replacement parts. This is a model-based parts search, not a diagnosis that a specific component failed.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.
Optional routine care
Maintenance supplies
These products support cleaning or routine upkeep. They are separate from the possible repair components above and are not claimed to fix this error code or symptom.
Washing Machine Cleaner Tablets
Routine tub-cleaning supplies for residue and odor control. They do not repair a mechanical, drainage, or electronic fault.
Braided Washer Inlet Hoses
A maintenance replacement option for visibly worn external fill hoses. Verify thread size, length, and hot/cold connection requirements.
Washer Drain Hose Holder
Helps secure an external drain hose at the standpipe. It does not correct an internal pump or control fault.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. Recommendations are based on routine-care relevance, not commission rate.
Technical Specifications
| note | The previous model-independent part specification was removed. Verify the full model number and diagnosis in the manufacturer's official parts catalog before ordering. |
|---|---|
| part_number | None |
Common Questions
What does F8 error mean on gorenje washing machine?
F8 error indicates a motor fault where the drum doesn't reach required spin speed, affecting cycle completion.
Can I fix gorenje washing machine F8 error myself?
Yes, start by checking for obstructions, balancing the load, and restarting the machine.
How much does it cost to fix F8 error?
The estimated repair cost ranges from 100 to 400 USD depending on parts and labor.
When should I call a technician for F8?
Call a technician if the error persists after basic checks or if you notice unusual noises or smells.
Data last verified: 2026-07-31
User Comments (0)
Share your experience or solution below.
Please login to post a comment.
Be the first to comment!