Gorenje Washing Machine: not functioning

Professional Repair Guide

What is this symptom?

If your Gorenje washing machine is not functioning, it may not power on or start a cycle when you press the start button. This issue is characterized by unresponsive controls and no drum movement, indicating potential power supply issues or faults in the door lock or control board.

Urgency: Medium

Important Tips for Gorenje Models

Gorenje models with digital displays may show error codes indicating specific faults; consult model manual for interpretation. (Exclusive Repairs

Possible Causes

Power supply or connection issue

How to Identify: No lights or display; unit completely unresponsive.

Part: Mains power connection / outlet

Door/lid not properly closed or door lock fault

How to Identify: Controls remain unresponsive until door is closed; error codes may appear in some models.

Part: Door lock switch

Control board or internal electronics failure

How to Identify: No response from controls despite power present; error codes or blinking LEDs in models with displays.

Part: Main control PCB

Drum or motor mechanical failure

How to Identify: Motor wonâ€™t turn when power is present; sounds of strain or no movement during attempted cycle.

Part: Drive belt / motor brushes / motor

DIY Solutions

Check power connections and reset

Easy 5â€“10 minutes

Ensure the washer is firmly plugged into a working outlet.
Check the household circuit breaker or fuse for tripped conditions.
Unplug the machine for 1â€“2 minutes, then plug back in to reset controls.

⚠️ Safety First: Ensure outlet is live using another device before plugging in the washer.

Verify door closure

Easy 3â€“5 minutes

Open and firmly close the washer door.
Listen for the door latch engaging securely.
Try to start a cycle again.

Next step

Choose the next step for not functioning

Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.

Based on diagnostic data

Most relevant component to inspect

Door Lock Assembly

Secures the door shut during operation for safety and signals the control board to run.

Typical part-only price: $30 - $75
DIY difficulty: Easy
Estimated time: 10-20 mins

Optional: enter your model number

Where can I find the model number?

Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.

Find a part that fits my model

Verify the complete model and part number on the retailer's compatibility page before ordering.

Other components that may be involved

Check these only if your diagnosis points to them.

Possible related component

Main Control Board

The central brain of the appliance that controls all components, cycles, and timings.

$120 - $280 · Medium · 20-40 mins

Check fit & price

Possible related component

Drive Belt

Transfers rotational power from the motor to turn the drum or tub.

$15 - $35 · Easy · 20-30 mins

Check fit & price

Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.

Professional Repairs

Control board replacement

Estimated Cost: $120 - $300+

Motor or drive assembly repair

Estimated Cost: $100 - $350+

When to Call a Professional

Machine still not functioning after checking power and door latch.

Internal control board or motor issues suspected.

Unusual noises or electrical burning smells are present.

Preventive Maintenance

Regularly inspect power cord and outlet: Power supply-related no-start issues
Frequency: monthly
Ensure door latch engagement: Door-lock related start failures
Frequency: Each use

Frequently Asked Questions

Why is my Gorenje Washing Machine not functioning?

Common causes include power supply issues, door lock faults, or control board failures.

How do I fix Gorenje Washing Machine not functioning myself?

Check power connections, reset the machine, and ensure the door is properly closed.

How much does it cost to fix not functioning?

Professional repairs can range from $100 to $350+, depending on the issue.

When should I call a technician for not functioning?

If DIY solutions don't work or if there are control board or motor issues, it's time to call a technician.

Community Analytical Insights

Analysis based on real user discussions from appliance repair communities

Can I Fix This Myself?

75%

DIY Success Rate Difficulty: Either

Common Issues Reported by Users

Power supply issue (outlet not working or power cord damaged)
Door latch malfunction (door not closing properly or latch broken)
Control board failure (electronics malfunction or software glitch)

User Suggested Solutions

Check the power supply: Ensure the washing machine is plugged in and the outlet is functioning. Test the outlet with another device. If the outlet is dead, check your circuit breaker.
Inspect the door latch: Open and close the door firmly. If it doesn't click, check for obstructions or damage. If broken, replace the door latch.
Reset the control board: Unplug the washing machine for 5 minutes to reset the electronics. If the problem persists, consider replacing the control board.