Gorenje Washing Machine: not filling with water

Professional Repair Guide

What is this symptom?

If your Gorenje washing machine is not filling with water, you may notice that no water enters the drum when starting a wash cycle. This issue may lead to error codes like E1, indicating a water inlet timeout. Understanding the common causes and solutions can help you resolve this problem efficiently.

Urgency: Medium

Important Tips for Gorenje Models

  • E1 error on Gorenje washers indicates water inlet timeout often due to inlet valve, kinked hose, or blocked filter.

Possible Causes

Water supply not open or available

How to Identify: No water enters; check external tap supplying washer; other faucets in home also no water if broader supply issue.

Part: Household water supply & inlet hose

Blocked or dirty inlet filter

How to Identify: Reduced or no water flow even with supply open; cleaning filter restores fill.

Part: Inlet hose filter screen

Kinked or improperly connected inlet hose

How to Identify: Hose sharply bent/kinked behind washer; straightening or reconnecting restores water flow.

Part: Inlet hose

Faulty water inlet valve

How to Identify: Hose and filters fine, water supply good, but machine still doesn’t fill; E1 error on some Gorenje models relates to inlet valve timeout.

Part: Water inlet valve

Lid/panel switch failure

How to Identify: Wash starts but no fill; lid may appear closed but switch not engaged; open/close lid triggers fill sometimes.

Part: Lid/panel safety switch

Internal electronic/control board fault

How to Identify: Random failure not resolved by other fixes; error codes, lack of response from controls.

Part: Control board/electronics

DIY Solutions

Check and open water supply tap

Easy 2-5 minutes
  1. Locate the water supply tap feeding the washing machine.
  2. Ensure the tap is fully turned on (open).
  3. Run a test cycle to see if water now enters.
⚠️ Safety First: Ensure no leaks when opening supply.

Inspect and clean inlet hose filter

Moderate 10-20 minutes
Tools Needed: Adjustable wrench, Bucket or towel, Soft brush
  1. Turn off water supply to washer.
  2. Place towel/bucket under hose connections.
  3. Unscrew inlet hose from machine and inspect filter screen.
  4. Clean debris from screen with brush.
  5. Reconnect hose securely and turn on water supply.
  6. Run test cycle.
⚠️ Safety First: Do not overtighten hose to avoid damage.

Straighten or reconnect inlet hose

Easy 5-10 minutes

Test lid/panel switch

Moderate 10-30 minutes
Tools Needed: Multimeter (optional)
  1. Open lid/panel and press switch manually to see if filling starts.
  2. If uncertain, disconnect power, access switch, and test continuity with multimeter.
  3. Replace switch if no continuity when actuated.
⚠️ Safety First: Disconnect power before internal access.

Next step

Choose the next step for not filling with water

Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.

Based on diagnostic data

Most relevant component to inspect

Water Inlet Valve

Controls the flow of hot and cold water into the appliance.

Typical part-only price
$25 - $60
DIY difficulty
Easy
Estimated time
15-30 mins
Where can I find the model number?

Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.

Find a part that fits my model

Verify the complete model and part number on the retailer's compatibility page before ordering.

Other components that may be involved

Check these only if your diagnosis points to them.

Possible related component

Main Control Board

The central brain of the appliance that controls all components, cycles, and timings.

$120 - $280 · Medium · 20-40 mins

Check fit & price

Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.

Professional Repairs

Replace water inlet valve

Estimated Cost: $30 - $80

Control board diagnostics/repair

Estimated Cost: $100 - $300

When to Call a Professional

Cannot determine cause after basic DIY checks
Water inlet valve or control board suspected defective
Inlet hose or filter issues too complex or internal wiring access required

Preventive Maintenance

  • Clean inlet filter: Clogs that lead to water fill issues
    Frequency: every 6 months
  • Inspect hoses for kinks or wear: Restricted water flow
    Frequency: quarterly

Frequently Asked Questions

Why is my Gorenje Washing Machine not filling with water?
Common causes include a closed water supply, blocked inlet filters, or a kinked hose.
How do I fix Gorenje Washing Machine not filling with water myself?
Check the water supply, clean the inlet filter, and ensure the hose is straight.
How much does it cost to fix not filling with water?
Replacing the water inlet valve costs $30 - $80; control board repairs range from $100 - $300.
When should I call a technician for not filling with water?
If DIY solutions fail or if the issue involves complex repairs like a control board fault.

References & Sources

Community Analytical Insights

Analysis based on real user discussions from appliance repair communities

Can I Fix This Myself?

75%
DIY Success Rate Difficulty: DIY

Common Issues Reported by Users

  • Blocked or kinked water inlet hose
  • Faulty water inlet valve
  • Issues with the water supply (e.g., turned off, low pressure)

User Suggested Solutions

  1. Check the water inlet hose for kinks or blockages. Ensure it is connected properly to both the machine and the water supply. If blocked, clear any obstructions.

  2. Inspect the water inlet valve for functionality. If the valve is faulty, replace it with a new one. Test the machine after replacement to ensure it fills with water.

  3. Verify that the water supply is turned on and check for any issues with water pressure. If the supply is low, contact your water provider.

Analysis based on 1 community discussions
View Sources

Data compiled from real discussions on r/appliancerepair and r/Appliances:

  1. New Washing machine-Help required

Community Discussions

the machine won't draw water

The issue was resolved after checking the water supply and ensuring the inlet hose was functioning properly.

DIY View on Reddit →

Source: Reddit r/appliancerepair

User Comments (0)

Share your experience or solution below.

Be the first to comment!