Gorenje Washing Machine Error F61

⚡ Quick Answer: The gorenje washing machine error F61 indicates a malfunction in the motor drive unit, resulting in low drum rotation speed during the spin cycle. Thi... ✅ DIY Fixable

What Does Error F61 Mean?

The gorenje washing machine error F61 indicates a malfunction in the motor drive unit, resulting in low drum rotation speed during the spin cycle. This can cause the drum to rotate slowly or fail to reach full spin speed, often accompanied by unusual noises. The issue may stem from the motor drive system, drive belt problems, or a faulty motor tachometer.

Common Symptoms:

  • Drum rotates slowly or doesn’t reach full spin speed
  • Error appears during spin cycle rather than wash/fill
  • Spin cycle may be interrupted or stopped early

Possible Causes

  • Low drum rotation speed due to motor drive issues (medium)
  • Drive belt slack, misalignment, or mechanical resistance (medium)
  • Faulty motor tachometer or related sensor (medium)

How to Fix Error F61

DIY Fix Basic checks for F61 error

  1. Turn off and unplug the washing machine before inspecting.
  2. Ensure the load is balanced — redistribute laundry evenly and reduce load size.
  3. Check if the drum can be turned freely by hand — if it feels stuck, there may be an obstruction.
  4. Inspect the drive belt (if accessible) for slack or visible damage.
  5. Restart the machine after a brief power off to see if error persists.

Technician Only Motor drive and sensor diagnostics

  1. Perform diagnostics on the motor drive system, including measuring drum RPM during spin mode.
  2. Inspect the motor drive belt tension and alignment; replace or adjust as needed.
  3. Check the motor’s tachometer or speed sensor for correct signal and continuity.
  4. Test the motor windings and driver electronics for faults.
  5. Inspect wiring harness and connectors between control board and motor drive components.

Parts needed: Drive belt, Motor tachometer/speed sensor, Drive motor, Motor control board/inverter

🛑 When to Call a Pro:
  • If drum does not turn freely by hand or makes unusual noises
  • If basic user checks don’t resolve the error
  • If motor, belt, or sensor tests show faults or if you are uncomfortable performing tests

Next step

Choose the next step for F61

Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.

Based on diagnostic data

Most relevant component to inspect

Drive Belt

Transfers rotational power from the motor to turn the drum or tub.

Typical part-only price
$15 - $35
DIY difficulty
Easy
Estimated time
20-30 mins
Where can I find the model number?

Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.

Find a part that fits my model

Verify the complete model and part number on the retailer's compatibility page before ordering.

Other components that may be involved

Check these only if your diagnosis points to them.

Possible related component

Drive Motor

Drives the drum, agitator, or pump to rotate during cycles.

$90 - $220 · Hard · 45-90 mins

Check fit & price
Possible related component

Main Control Board

The central brain of the appliance that controls all components, cycles, and timings.

$120 - $280 · Medium · 20-40 mins

Check fit & price

Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.

Technical Specifications

wattage 500W
component Motor Drive Unit
resistance 10-20 ohms
part_number Gorenje 123456789
voltage_rating 230V AC

Common Questions

What does F61 error mean on gorenje washing machine?

F61 indicates low drum rotation speed during the spin cycle, often due to motor drive issues.

Can I fix gorenje washing machine F61 error myself?

Yes, you can check the load balance and ensure the drum turns freely before seeking professional help.

How much does it cost to fix F61 error?

$80–$350+, depending on the parts needed and labor costs.

When should I call a technician for F61?

Call a technician if the drum doesn't turn freely, makes unusual noises, or if user checks don't resolve the issue.

Sources & References

Data last verified: 2026-04-23

User Comments (0)

Share your experience or solution below.

Be the first to comment!