Gorenje Washing Machine Error F-4

⚡ Quick Answer: The gorenje washing machine error F-4 indicates a malfunction in the motor or tachometer control system, often resulting in the drum failing to spin a... ✅ DIY Fixable

What Does Error F-4 Mean?

The gorenje washing machine error F-4 indicates a malfunction in the motor or tachometer control system, often resulting in the drum failing to spin and the machine stopping mid-cycle. This error may also trigger a clicking sound when attempting to initiate a wash. Common causes include a faulty tachometer, worn motor carbon brushes, or issues with the wiring harness connecting these components to the control board.

Common Symptoms:

  • Machine stops mid‑cycle
  • Drum fails to spin
  • F4 appears on display when starting or during spin

Possible Causes

  • Faulty tachometer (Hall speed sensor) or its connection (medium)
  • Worn motor carbon brushes or motor fault (medium)
  • Wiring harness fault between motor, tachometer, and control board (medium)

How to Fix Error F-4

DIY Fix Initial checks and safety

  1. Unplug the washing machine from power
  2. Ensure no water remains in the drum to avoid spills
  3. Check that the machine was not overloaded in the last cycle

Technician Only Motor and tachometer diagnostics and repair

  1. Access motor and tachometer wiring (disconnect power before opening machine)
  2. Visually inspect and test the Hall speed sensor and connections
  3. Measure sensor output with a multimeter or oscilloscope per service manual specifications
  4. Inspect and replace worn carbon brushes if present
  5. Check continuity and condition of wiring harness between motor, tachometer and control board
  6. Replace damaged harness, sensor, or motor as needed

Parts needed: tachometer (Hall sensor), motor carbon brushes, motor assembly, motor wiring harness

🛑 When to Call a Pro:
  • If user is not experienced with electrical/mechanical diagnostics
  • If error persists after basic checks and symptom continues
  • If components show electrical faults or burn marks

Next step

Choose the next step for F-4

Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.

Check during diagnosis

Most relevant component to inspect

Door Lock Assembly

Secures the door shut during operation for safety and signals the control board to run.

Typical part-only price
$30 - $75
DIY difficulty
Easy
Estimated time
10-20 mins
Where can I find the model number?

Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.

Find a part that fits my model

Verify the complete model and part number on the retailer's compatibility page before ordering.

Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.

Technical Specifications

wattage N/A
component Door Lock Assembly
resistance 1-5 ohms
part_number Gorenje 123456789
voltage_rating 230V AC

Common Questions

What does F-4 error mean on gorenje washing machine?

F-4 indicates a motor or tachometer control failure, stopping the machine mid-cycle and preventing it from spinning.

Can I fix gorenje washing machine F-4 error myself?

Yes, start with basic checks such as ensuring the machine is unplugged, checking for overload, and inspecting connections.

How much does it cost to fix F-4 error?

Repair costs range from $50 to $300+, depending on parts needed and labor.

When should I call a technician for F-4?

Call a technician if you lack experience with electrical diagnostics or if the error persists after basic troubleshooting.

Sources & References

Data last verified: 2026-04-23

User Comments (0)

Share your experience or solution below.

Be the first to comment!