Gorenje Washing Machine Error F5
⚡ Quick Answer: The Gorenje washing machine error F5 indicates a water draining issue, preventing the machine from emptying water from the drum. Symptoms include the ... ✅ DIY Fixable
What Does Error F5 Mean?
The Gorenje washing machine error F5 indicates a water draining issue, preventing the machine from emptying water from the drum. Symptoms include the cycle stopping mid-program, water remaining in the drum after a wash or spin, and failure to drain before spinning. Common causes include a clogged drain filter, hose, or pump, as well as a faulty drain pump or its circuitry.
Common Symptoms:
- Cycle stops mid‑program with F5 displayed
- Water remains in the drum after a wash or spin
- Machine fails to drain properly before spinning
Possible Causes
- Clogged drain filter, hose or pump (medium)
- Faulty drain pump or pump circuitry (medium)
How to Fix Error F5
DIY Fix Check and clear the drain filter and hoses
- Turn off and unplug the washing machine.
- Locate the drain filter access panel (usually at the bottom front).
- Place a tray/towels underneath and slowly open the filter cover.
- Remove debris and rinse the filter clean.
- Check the drain hose for kinks, clogs or obstructions.
- Reassemble and retry a short drain/spin cycle.
Technician Only Inspect or replace the drain pump and related components
- Disconnect power and water supply.
- Remove the back or bottom service panel to access the drain pump.
- Test the pump for proper operation and electrical continuity.
- Inspect wiring and connectors for damage or corrosion.
- Replace the pump or repair circuitry if faulty.
- Reassemble and verify drain function.
Parts needed: Drain pump, Drain hose, Pump wiring/connectors
- If water continues to remain after clearing the filter and hoses
- If the pump makes unusual noises or does not activate
- If there are signs of electrical faults (burnt smell, visible damage)
Next step
Choose the next step for F5
Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.
Most relevant component to inspect
Drain Pump
Pumps waste water out of the appliance during the drain cycle.
- Typical part-only price
- $35 - $80
- DIY difficulty
- Easy
- Estimated time
- 15-30 mins
Where can I find the model number?
Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.
Verify the complete model and part number on the retailer's compatibility page before ordering.
Other components that may be involved
Check these only if your diagnosis points to them.
Drain Hose
Carries waste water from the drain pump to your home's standpipe or sink drain.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.
Technical Specifications
| wattage | N/A |
|---|---|
| component | Door Lock Assembly |
| resistance | 1-5 ohms |
| part_number | Gorenje 123456789 |
| voltage_rating | 230V AC |
Common Questions
What does F5 error mean on gorenje washing machine?
The F5 error indicates a water draining issue, often due to a clogged filter or a faulty drain pump.
Can I fix gorenje washing machine F5 error myself?
Yes, you can check and clear the drain filter and hoses to potentially resolve the issue.
How much does it cost to fix F5 error?
The estimated repair cost ranges from ¥8,000 to ¥20,000, including parts and labor.
When should I call a technician for F5?
Call a technician if water remains after clearing the filter, if the pump is noisy, or if there are signs of electrical faults.
Sources & References
Data last verified: 2026-04-23
User Comments (0)
Share your experience or solution below.
Please login to post a comment.
Be the first to comment!