Gorenje Washing Machine Error F3
⚡ Quick Answer: The Gorenje washing machine F3 error indicates a malfunction in the water level sensor, leading to issues such as the machine failing to fill with wat... ✅ DIY Fixable
What Does Error F3 Mean?
The Gorenje washing machine F3 error indicates a malfunction in the water level sensor, leading to issues such as the machine failing to fill with water to the required level. This error may cause the wash cycle to stop shortly after starting or not begin at all. Common causes include insufficient water supply or pressure, clogged inlet filters, or a faulty water inlet valve.
Common Symptoms:
- Washing machine fails to fill with water to the required level before cycle start
- Wash cycle stops shortly after program start or doesn’t begin due to fill failure
- Error F3 displayed on control panel
Possible Causes
- Insufficient water supply/pressure (medium)
- Clogged inlet filter or supply hose issues (medium)
- Faulty water inlet valve (medium)
- Pressure sensor or its hose malfunction (less common) (low)
How to Fix Error F3
DIY Fix Basic user checks for F3 error
- Ensure the water supply tap feeding the washing machine is fully open
- Check that household water pressure is adequate
- Inspect the water inlet hose for kinks or bends
- Turn off power and water supply, then disconnect and clean the inlet filter at the hose connection
Technician Only Technician‑level diagnosis and repair for F3 error
- Measure incoming water pressure at the inlet to verify it meets specification
- Test the water inlet valve for correct operation and replace if faulty
- Inspect and test the pressure sensor and its hose for integrity
- Verify wiring and connections to inlet components and control board
Parts needed: water inlet valve, inlet hose and filter, pressure sensor and hose
- No water fills after basic checks and cleaning
- Water inlet valve or pressure sensor suspected damaged
- Internal component faults or electrical issues suspected
Next step
Choose the next step for F3
Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.
Most relevant component to inspect
Water Inlet Valve
Controls the flow of hot and cold water into the appliance.
- Typical part-only price
- $25 - $60
- DIY difficulty
- Easy
- Estimated time
- 15-30 mins
Where can I find the model number?
Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.
Verify the complete model and part number on the retailer's compatibility page before ordering.
Other parts options
Check related components first; use model search as a fallback.
Model-compatible Washing Machine parts
Enter the complete model number to browse compatible replacement parts. This is a model-based parts search, not a diagnosis that a specific component failed.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.
Optional routine care
Maintenance supplies
These products support cleaning or routine upkeep. They are separate from the possible repair components above and are not claimed to fix this error code or symptom.
Washing Machine Cleaner Tablets
Routine tub-cleaning supplies for residue and odor control. They do not repair a mechanical, drainage, or electronic fault.
Braided Washer Inlet Hoses
A maintenance replacement option for visibly worn external fill hoses. Verify thread size, length, and hot/cold connection requirements.
Washer Drain Hose Holder
Helps secure an external drain hose at the standpipe. It does not correct an internal pump or control fault.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. Recommendations are based on routine-care relevance, not commission rate.
Technical Specifications
| note | The previous model-independent part specification was removed. Verify the full model number and diagnosis in the manufacturer's official parts catalog before ordering. |
|---|---|
| part_number | None |
Common Questions
What does F3 error mean on gorenje washing machine?
F3 error means the washing machine isn't filling with water correctly due to a water level sensor malfunction.
Can I fix gorenje washing machine F3 error myself?
Yes, you can check the water supply tap, pressure, and inspect the inlet hose for kinks.
How much does it cost to fix F3 error?
Repair costs for the F3 error range from $50 to $200, depending on parts and labor.
When should I call a technician for F3?
Call a technician if no water fills after basic checks or if internal components may be damaged.
Sources & References
Data last verified: 2026-07-31
User Comments (0)
Share your experience or solution below.
Please login to post a comment.
Be the first to comment!