Gorenje Washing Machine Error F-1

⚡ Quick Answer: The Gorenje washing machine F-1 error indicates a malfunction in the temperature sensor circuit, leading to issues with water heating. Symptoms includ... ✅ DIY Fixable

What Does Error F-1 Mean?

The Gorenje washing machine F-1 error indicates a malfunction in the temperature sensor circuit, leading to issues with water heating. Symptoms include the washing cycle stopping unexpectedly or completing without heating, and the error may appear shortly after starting or during the heating phase. This can stem from a faulty temperature sensor, wiring connection issue, or control board misreading.

Common Symptoms:

  • Washing cycle stops or completes without heating
  • No proper water heating during wash
  • Error code shown shortly after start or during heating phase

Possible Causes

  • Temperature sensor (NTC) failure or disconnection (medium)
  • Wiring connection issue to the temperature sensor (medium)
  • Control board misreading or related component issue (low)

How to Fix Error F-1

DIY Fix Basic checks and reset

  1. Power off the washing machine and unplug it.
  2. Wait a few minutes and plug it back in to reset the control.
  3. Restart the cycle to see if the error persists.
  4. Ensure the machine is not overloaded and the water supply is correct.

Technician Only Diagnose and replace temperature sensor

  1. Disconnect main power and open access panel to the heater area.
  2. Locate the NTC temperature sensor and inspect for damage or loose connectors.
  3. Test sensor resistance with a multimeter as per model specifications.
  4. Replace the sensor if faulty; verify wiring integrity.
  5. Reassemble and test washing machine operation.

Parts needed: Temperature sensor (NTC), Associated wiring/connectors

🛑 When to Call a Pro:
  • If the error persists after basic reset and checks
  • If you are uncomfortable testing electrical components
  • If the wiring harness or control board shows signs of damage

Next step

Choose the next step for F-1

Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.

Based on diagnostic data

Most relevant component to inspect

Temperature Sensor

Monitors the internal temperature to ensure correct operation and prevent overheating.

Typical part-only price
$15 - $35
DIY difficulty
Easy
Estimated time
15-30 mins
Where can I find the model number?

Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.

Find a part that fits my model

Verify the complete model and part number on the retailer's compatibility page before ordering.

Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.

Technical Specifications

wattage N/A
component Water Level Sensor
resistance 1-10 kΩ
part_number Gorenje 123456789
voltage_rating 230V AC

Common Questions

What does F-1 error mean on gorenje washing machine?

The F-1 error signifies a temperature sensor fault affecting water heating.

Can I fix gorenje washing machine F-1 error myself?

Yes, try power cycling the machine and resetting the cycle.

How much does it cost to fix F-1 error?

Estimated repair costs range from ¥3,000 to ¥10,000, depending on parts and labor.

When should I call a technician for F-1?

Call a technician if the issue persists after a reset or if you're uncomfortable with electrical components.

Data last verified: 2026-04-23

User Comments (0)

Share your experience or solution below.

Be the first to comment!