Frigidaire Oven Error F93
⚡ Quick Answer: The Frigidaire Oven F93 error indicates that the maximum oven door lock time has been exceeded. This usually happens when the door lock mechanism fail... ✅ DIY Fixable
What Does Error F93 Mean?
The Frigidaire Oven F93 error indicates that the maximum oven door lock time has been exceeded. This usually happens when the door lock mechanism fails to engage properly, leading to erratic temperature readings or the oven not heating at all. Symptoms include the F93 error displayed on the control panel, a locked oven door that won't unlock, continuous beeping alerts, and potential aborting of the self-clean cycle.
Common Symptoms:
- F93 displayed on control panel
- Oven door locked or won’t lock
- Beeping or continuous alerts
- Self‑clean cycle may abort
Possible Causes
- Door lock mechanism failure (motor or latch) (medium)
- Faulty or defective door lock switch (medium)
- Wiring issues between control and lock components (medium)
How to Fix Error F93
DIY Fix Basic Reset & Check
- Disconnect power (unplug or flip breaker) for ~30 seconds to reset control and clear transient errors.
- Ensure oven door is fully closed and nothing obstructs latch movement.
- Try a basic self‑clean or heat cycle to see if error recurs after reset.
Technician Only Inspect and Repair Door Lock Assembly
- Disconnect power and access the door lock motor and latch assembly.
- Check for physical obstructions and ensure latch moves smoothly.
- Test door lock motor and switch for proper operation (continuity and movement).
- Inspect wiring harness between lock assembly and EOC; repair any damaged wires.
- Replace door lock motor/switch assembly if defective.
Parts needed: Door lock motor assembly, Door lock switch, Wiring harness to EOC
- If door lock mechanism tests normal but F93 persists
- If wiring appears damaged in multiple areas
- If control board (EOC) diagnostics are required
Next step
Choose the next step for F93
Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.
Most relevant component to inspect
Wiring Harness
Connects controls, sensors, motors, and other electrical components inside the appliance.
- Typical part-only price
- $20 - $120
- DIY difficulty
- Medium
- Estimated time
- 30-90 mins
Where can I find the model number?
Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.
Verify the complete model and part number on the retailer's compatibility page before ordering.
Other parts options
Check related components first; use model search as a fallback.
Model-compatible Oven parts
Enter the complete model number to browse compatible replacement parts. This is a model-based parts search, not a diagnosis that a specific component failed.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.
Optional routine care
Maintenance supplies
These products support cleaning or routine upkeep. They are separate from the possible repair components above and are not claimed to fix this error code or symptom.
Non-Scratch Cooktop Cleaner
A routine surface-care product. Confirm that it is approved for the specific glass, ceramic, enamel, or stainless finish.
Oven Thermometer
A diagnostic aid for comparing cavity temperature during a controlled check. It does not prove which internal component has failed.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. Recommendations are based on routine-care relevance, not commission rate.
Technical Specifications
| wattage | |
|---|---|
| component | Temperature Sensor |
| resistance | 1000-1100 ohms |
| part_number | 316217002 |
| voltage_rating | 120V AC |
Common Questions
What does F93 error mean on Frigidaire Oven?
F93 means the oven door lock failed to engage, causing erratic temperature readings.
Can I fix Frigidaire Oven F93 error myself?
Yes, you can try resetting the oven and ensuring the door is fully closed.
How much does it cost to fix F93 error?
Repair costs range from $80 to $250 for parts only; labor is extra.
When should I call a technician for F93?
Call if the door lock tests normal but F93 persists or if wiring is damaged.
Sources & References
- Frigidaire Range Error Code Guide (F90–F94) (official)
Data last verified: 2026-07-22
User Comments (0)
Share your experience or solution below.
Please login to post a comment.
Be the first to comment!