Frigidaire Oven: not igniting

Possible Causes

Faulty oven igniter too weak or broken

How to Identify: Igniter does not glow or glows but for long period (>90 seconds without gas ignition

Part: Oven igniter

Gas supply issues (valve closed or line blocked)

How to Identify: No sound of gas flow when oven is turned on; other gas appliances also not operating

Part: Gas supply valve/line

Clogged burner ports or debris at igniter/burner

How to Identify: Visible debris or grease around burner, irregular or no flame even when spark/igniter appears correct

Part: Burner ports/assembly

Safety valve malfunction

How to Identify: Igniter glows normally but gas does not flow, preventing flame formation

Part: Gas safety valve

Control board or electronic ignition control fault

How to Identify: Unresponsive controls, error codes, or erratic ignition behavior

Part: Oven control board/ignition control

DIY Solutions

Inspect and clean burner and igniter

Moderate 15-30 minutes

Tools Needed: screwdriver, soft brush/toothbrush

1. Disconnect power and shut off gas supply
2. Remove oven racks and access igniter and burner area
3. Gently brush away debris or food residue around burner ports and igniter
4. Reassemble and test ignition

⚠️ Safety First: Always turn off gas and power before working on oven parts

Test and replace weak or broken igniter

Advanced 30-60 minutes

Tools Needed: screwdriver, multimeter

1. Turn off power and gas supply
2. Remove bottom panel and locate the igniter
3. Test igniter for continuity with multimeter
4. Replace igniter if it shows no continuity or fails to glow sufficiently
5. Reassemble and restore power and gas to test

⚠️ Safety First: Ensure correct part number for Frigidaire model

Next step

Choose the next step for not igniting

Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.

Based on diagnostic data

Most relevant component to inspect

Hot Surface Igniter

Heats until it can ignite gas released by the burner valve in ovens and gas dryers.

Typical part-only price

$20 - $65

DIY difficulty

Medium

Estimated time

20-45 mins

Optional: enter your model number

Apply

Where can I find the model number?

Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.

Find a part that fits my model

Verify the complete model and part number on the retailer's compatibility page before ordering.

Other parts options

Check related components first; use model search as a fallback.

Possible related component

Main Control Board

The central brain of the appliance that controls all components, cycles, and timings.

$120 - $280 · Medium · 20-40 mins

Check fit & price

Model number required

Model-compatible Oven parts

Enter the complete model number to browse compatible replacement parts. This is a model-based parts search, not a diagnosis that a specific component failed.

Find a part that fits my model

Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.

Optional routine care

Maintenance supplies

These products support cleaning or routine upkeep. They are separate from the possible repair components above and are not claimed to fix this error code or symptom.

Maintenance supply

Non-Scratch Cooktop Cleaner

A routine surface-care product. Confirm that it is approved for the specific glass, ceramic, enamel, or stainless finish.

View maintenance supply

Diagnostic tool

Oven Thermometer

A diagnostic aid for comparing cavity temperature during a controlled check. It does not prove which internal component has failed.

View maintenance supply

Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. Recommendations are based on routine-care relevance, not commission rate.

Professional Repairs

Replace gas safety valve

Estimated Cost: $150 - $300

Control board / ignition control replacement

Estimated Cost: $200 - $500

When to Call a Professional

You detect gas odor when attempting to ignite

Igniter replacement does not restore ignition

Suspected gas line or safety valve malfunctions

Preventive Maintenance

• Clean burner ports and igniter area: Debris buildup that can hinder ignition
  Frequency: monthly
• Inspect gas line and valve: Gas supply interruptions or leaks
  Frequency: annually

Frequently Asked Questions

Why is my Frigidaire Oven not igniting?

Common causes include a weak or broken igniter, gas supply issues, or clogged burner ports.

How do I fix Frigidaire Oven not igniting myself?

Inspect and clean the burner and igniter. If needed, test and replace the igniter.

How much does it cost to fix not igniting?

Professional repairs can range from $150 to $500 depending on the issue.

When should I call a technician for not igniting?

If cleaning and replacing the igniter doesn't work, or if you're unsure, call a technician.

Common Issues Reported by Users

• Faulty spark ignition switch/module (2 mentions)
• Defective spark module (2 mentions)

User Suggested Solutions

1. Replace faulty spark ignition switch/module

2. Test ignitors and replace spark module if necessary

3. Order ignition module as a potential fix

Community Discussions

No spark on left burners electrode igniters

Test the ignitor by connecting a working one to the non-working ones; if they work, replace the spark module.

DIY View on Reddit →

stove electric ignition not working

Ordered ignition module as a potential fix.

DIY View on Reddit →

1 burner won't click or light up

Possible faulty spark ignition switch/module; using a BBQ lighter is a temporary solution.

Pro needed View on Reddit →

Source: Reddit r/appliancerepair