Frigidaire Oven: not heating

Professional Repair Guide

What is this symptom?

Is your Frigidaire oven turning on but failing to heat? If the display powers up without producing heat, even after preheating, it may be due to a faulty heating element, control board issues, or a blown thermal fuse. Understanding these causes can help you troubleshoot effectively.

Urgency: Medium

Important Tips for Frigidaire Models

  • No official Frigidaire service bulletin found, but multiple repair guides for Frigidaire ovens report similar heating element and igniter issues

Possible Causes

Faulty heating element (electric ovens)

How to Identify: Element does not glow red when oven is set to bake; visible cracks, blisters, or burn marks; no continuity on multimeter.

Part: Bake heating element

Control board failure

How to Identify: Display controls work but board fails to send power to elements; burnt marks or component damage visible.

Part: Oven control board

Blown thermal fuse or safety device

How to Identify: Continuity test fails on thermal fuse; no heat after safety trip.

Part: Thermal fuse/oven safety valve

DIY Solutions

Inspect and Replace Bake Heating Element

Moderate 30-60 minutes
Tools Needed: screwdriver, multimeter
  1. Ensure oven is unplugged or breaker off.
  2. Remove oven racks and access the heating element.
  3. Visually inspect for damage; test continuity with multimeter.
  4. If defective, disconnect element wires and replace with a matching Frigidaire part.
  5. Restore power and test heating function.
⚠️ Safety First: Always disconnect power before working inside the oven.

Test and Replace Temperature Sensor

Moderate 30-60 minutes
Tools Needed: screwdriver, multimeter
  1. Disconnect power and access oven interior.
  2. Locate temperature sensor (usually rear of oven).
  3. Test resistance with multimeter; values should change with heat.
  4. If defective, replace sensor.
  5. Restore power and verify temperature accuracy.
⚠️ Safety First: Disconnect power; avoid touching bare wires.

Professional Repairs

Igniter Replacement (Gas Models)

Estimated Cost: $80 - $200

Control Board Replacement

Estimated Cost: $150 - $400

Thermal Fuse or Safety Valve Replacement

Estimated Cost: $40 - $150

When to Call a Professional

Gas oven components like igniters and safety valves
Control board issues
Persistent no-heat after DIY checks

Preventive Maintenance

  • Regularly inspect heating elements and sensors: Failure due to wear or damage
    Frequency: annually
  • Keep oven interior clean: Debris causing uneven heat or sensor issues
    Frequency: monthly

Frequently Asked Questions

Why is my Frigidaire Oven not heating?
Common causes include a faulty heating element, control board failure, or a blown thermal fuse.
How do I fix Frigidaire Oven not heating myself?
You can inspect and replace the bake heating element or test the temperature sensor with a multimeter.
How much does it cost to fix not heating?
Professional repairs range from $40 for a thermal fuse to $400 for control board replacement.
When should I call a technician for not heating?
If DIY fixes do not resolve the issue or if the problem involves complex components, it's time to call a technician.

Community Analytical Insights

Analysis based on real user discussions from appliance repair communities

Can I Fix This Myself?

65%
DIY Success Rate Difficulty: Either

Common Issues Reported by Users

  • Control board failure (6 mentions)
  • Igniter failure (5 mentions)
  • Heating element failure (4 mentions)
  • Thermostat issues (3 mentions)

User Suggested Solutions

  1. Replace the igniter

    Success rate: 8.0%

  2. Replace the control board

    Success rate: 6.0%

  3. Replace the heating element

    Success rate: 5.0%

  4. Check and replace the thermostat

    Success rate: 3.0%

  5. Power cycle the oven

    Success rate: 2.0%
Analysis based on 38 community discussions
View Sources

Data compiled from real discussions on r/appliancerepair and r/Appliances:

  1. My oven exploded and I'm at a loss for words on how to fix i...
  2. Oven Died
  3. Oven element not working despite good resistance readings
  4. How to Test & Replace the Oven Bake Element on a Frigidaire ...
  5. Frigidaire Oven Control Panel Broken?
  6. Help troubleshooting Frigidaire oven - igniter doesn't glow
  7. Frigidaire oven won't turn on but stovetop works
  8. Frigidaire electric oven cgeb27s7cb2 bottom element not heat...
  9. Frigidaire oven (FFEF3403LSK) no longer heats up, but the to...
  10. Frigidaire oven shuts off baking
  11. Frigidaire Oven
  12. Frigidaire Bottom oven burner won't send gas to it distribut...
  13. Oven light is on but won't reach temperature, I forget which...
  14. Frigidaire gas oven won't bake or broil
  15. Frigidaire Oven Troubleshooting
  16. Frigidaire ES510 - oven won't turn on but burners work. Ho...
  17. Frigidaire oven - CPES389AC2 - loud bang + tripped breaker, ...
  18. Help Troubleshooting an Oven. Bake feature won't work.
  19. Need help finding part to replace Frigidaire oven thermostat...
  20. Frigidaire oven not working
  21. Frigidaire Professional Oven (Model CPLES399EC4) - Screen Er...
  22. Frigidaire Oven Bake mode not working
  23. Frigidaire oven not turning on
  24. Oven not working
  25. Gas Frigidaire Oven - FGEW3066UFC - BROILER NOT WORKING NEED...
  26. Broken oven still not working after replacing the ignitor
  27. Frigidaire Oven PLEF489CCB control board Bake Relay not work...
  28. Frigidaire Gallery DGEF3041KFM Electric Oven heating when no...
  29. 1999 Frigidaire oven temperature sensor broke off the wire. ...
  30. Overlay for Frigidaire oven control with heating zone/warmin...
  31. Frigidaire Oven Barely Heating
  32. Oven Repair and my Stupid Mistake
  33. Frigidaire oven will not heat.
  34. Frigidaire CFEF3048LSM bake element broke in two, replaced i...
  35. Frigidaire FGGF3059TFA gas oven won't bake, but all other ga...
  36. Frigidaire gas oven stopped working after cleaning stove top...
  37. Frigidaire Gallery Gas Oven Doesn't Heat
  38. Gas oven is not holding temperature

Community Discussions

oven heating element burnt out

Replaced the control board after diagnosing that the bake element received 0 volts.

DIY View on Reddit →

Range top not working

Replaced the relay board with the correct one.

DIY View on Reddit →

broiler element not working

The issue was with the control board, which was replaced.

Pro needed View on Reddit →

oven started heating incredibly slowly, top/broiler element not turning on

Replaced the main board and everything has worked perfectly since then.

DIY View on Reddit →

oven randomly shutting off

Replaced the relay board after finding a failed relay.

DIY View on Reddit →

Source: Reddit r/appliancerepair

User Comments (0)

Share your experience or solution below.

Be the first to comment!