Frigidaire Oven Error F14
⚡ Quick Answer: The Frigidaire oven error F14 indicates a communication issue between the control interface and the main control board, often caused by a loose or mis... ✅ DIY Fixable
What Does Error F14 Mean?
The Frigidaire oven error F14 indicates a communication issue between the control interface and the main control board, often caused by a loose or misconnected keyboard cable. This error typically results in the display showing F14, unresponsive oven controls, and inconsistent cooking performance. To resolve this, a visual inspection and reseating of the cable may be necessary. If the error persists, further inspection or replacement of parts may be required.
Common Symptoms:
- Display shows F14 on control panel
- Oven not responding to user inputs via keypad or touch panel
- Intermittent or no functionality of oven controls
Possible Causes
- Loose or misconnected keyboard/touch panel cable (high)
How to Fix Error F14
DIY Fix Basic Reset and Visual Inspection
- Disconnect power to the oven at the breaker or plug.
- Wait 5–10 minutes to allow electronics to reset.
- Restore power and check if F14 clears.
- Visually inspect control panel area for obvious damage or debris around buttons/touch surfaces.
Technician Only Reseat or Replace Ribbon Cable and Inspect Control Interface
- Disconnect power to the oven.
- Remove control panel to access the ribbon cable between the keypad/touch panel and electronic oven control (EOC) board.
- Inspect the ribbon cable for damage, debris, or bent pins.
- Clean contacts if dirty and securely reconnect.
- Test operation; if error persists, replace the keypad/touch panel assembly.
- If problem continues, test and potentially replace the main control board.
Parts needed: Keypad/Touch panel assembly, Ribbon cable, Electronic Oven Control board
- If error persists after cable reseating and cable/hardware inspection
- If you are uncomfortable working with internal electronic parts
- If signs of control board damage (burn marks, corrosion) are present
Next step
Choose the next step for F14
Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.
Most relevant component to inspect
User Interface Board
Receives button or touch input and controls the appliance display and indicators.
- Typical part-only price
- $70 - $220
- DIY difficulty
- Medium
- Estimated time
- 20-60 mins
Where can I find the model number?
Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.
Verify the complete model and part number on the retailer's compatibility page before ordering.
Other parts options
Check related components first; use model search as a fallback.
Ribbon Cable
Carries low-voltage signals between a user interface, display, and electronic control board.
Main Control Board
The central brain of the appliance that controls all components, cycles, and timings.
Model-compatible Oven parts
Enter the complete model number to browse compatible replacement parts. This is a model-based parts search, not a diagnosis that a specific component failed.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.
Optional routine care
Maintenance supplies
These products support cleaning or routine upkeep. They are separate from the possible repair components above and are not claimed to fix this error code or symptom.
Non-Scratch Cooktop Cleaner
A routine surface-care product. Confirm that it is approved for the specific glass, ceramic, enamel, or stainless finish.
Oven Thermometer
A diagnostic aid for comparing cavity temperature during a controlled check. It does not prove which internal component has failed.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. Recommendations are based on routine-care relevance, not commission rate.
Technical Specifications
| wattage | N/A |
|---|---|
| component | Temperature Sensor |
| resistance | 10K ohms at 25°C |
| part_number | 316217002 |
| voltage_rating | 120V AC |
Common Questions
What does F14 error mean on Frigidaire oven?
F14 indicates a communication error between the control interface and the main control board, often due to a loose cable.
Can I fix Frigidaire oven F14 error myself?
Yes, you can try resetting the oven and inspecting the connections. Disconnect power, wait, and reconnect.
How much does it cost to fix F14 error?
Repair costs range from $50 to $350, depending on the parts that may need replacement.
When should I call a technician for F14?
Call a technician if the error persists after reseating cables or if you're uncomfortable working with electronics.
Data last verified: 2026-07-22
User Comments (0)
Share your experience or solution below.
Please login to post a comment.
Be the first to comment!