Frigidaire Oven Error F92

⚡ Quick Answer: The Frigidaire Oven error code F92 signals a door lock issue, usually occurring when the oven door remains open longer than permitted, or due to a mal... ✅ DIY Fixable

What Does Error F92 Mean?

The Frigidaire Oven error code F92 signals a door lock issue, usually occurring when the oven door remains open longer than permitted, or due to a malfunction in the door lock mechanism. This error prevents the oven from heating or performing any functions until the issue is resolved. Common causes include obstructions, defective hinges or latches, and faulty door lock switches.

Common Symptoms:

  • Error code F92 displayed on oven panel when door is open too long or self‑clean has finished
  • Oven door fails to fully secure/lock or detects door remains open longer than expected
  • Oven may be disabled from heating or performing functions until code is cleared

Possible Causes

  • Door remains open longer than the control allows (timing out the lock state) (medium)
  • Obstruction, defective hinge, or latch preventing proper door closure (medium)
  • Defective door lock switch or related sensor not signaling closed state (medium)

How to Fix Error F92

DIY Fix Basic diagnosis and reset

  1. Ensure the oven door is fully closed and nothing obstructs it.
  2. Disconnect power by unplugging the oven or switching off the circuit breaker for about 30 seconds, then restore power.
  3. Try opening and closing the door a few times to reseat the latch.

Technician Only Inspect and repair door lock/closure components

  1. Check door hinges and latch for wear, damage, or debris preventing full closure.
  2. Test the door lock switch and any sensors related to door position for continuity and proper operation.
  3. Inspect wiring between the door lock assembly and the control board for loose or damaged connections.

Parts needed: Door lock switch, Hinges/latches, Wiring harness

🛑 When to Call a Pro:
  • If the error persists after basic resets and door inspection
  • If door lock motor or switch tests indicate internal failure
  • If wiring or control board faults are suspected

Next step

Choose the next step for F92

Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.

Other parts options

Check related components first; use model search as a fallback.

Model number required

Model-compatible Oven parts

Enter the complete model number to browse compatible replacement parts. This is a model-based parts search, not a diagnosis that a specific component failed.

Find a part that fits my model

Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.

Optional routine care

Maintenance supplies

These products support cleaning or routine upkeep. They are separate from the possible repair components above and are not claimed to fix this error code or symptom.

Maintenance supply

Non-Scratch Cooktop Cleaner

A routine surface-care product. Confirm that it is approved for the specific glass, ceramic, enamel, or stainless finish.

View maintenance supply
Diagnostic tool

Oven Thermometer

A diagnostic aid for comparing cavity temperature during a controlled check. It does not prove which internal component has failed.

View maintenance supply

Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. Recommendations are based on routine-care relevance, not commission rate.

Technical Specifications

wattage N/A
component Temperature Sensor
resistance 1000-2000 ohms
part_number 316217002
voltage_rating 120V AC

Common Questions

What does F92 error mean on Frigidaire Oven?

F92 error indicates a door lock malfunction, preventing the oven from heating due to the door being open too long.

Can I fix Frigidaire Oven F92 error myself?

Yes, you can try closing the door firmly, check for obstructions, and reset the oven by disconnecting power for 30 seconds.

How much does it cost to fix F92 error?

Repair costs for F92 can range from $50 to $250, depending on the necessary parts and labor.

When should I call a technician for F92?

Call a technician if the error persists after resets or if you suspect internal failure of the door lock motor or wiring issues.

Sources & References

Data last verified: 2026-07-22

User Comments (0)

Share your experience or solution below.

Be the first to comment!

Call Local Repair Provider +1 (888) 217-6318