Frigidaire Oven Error F30
⚡ Quick Answer: The Frigidaire Oven F30 error code indicates a malfunction in the temperature sensor circuit, leading to incorrect temperature readings or failure to ... ⚠️ Difficulty Varies
What Does Error F30 Mean?
The Frigidaire Oven F30 error code indicates a malfunction in the temperature sensor circuit, leading to incorrect temperature readings or failure to heat properly. This may be due to an open or faulty temperature sensor (RTD), damaged wiring, or a misinterpreting control board. Users may experience issues while baking or broiling, with the oven unable to regulate or reach the desired temperature.
Common Symptoms:
- Oven displays F30 code when attempting to bake or broil
- Oven fails to regulate or reach the set temperature
- Oven may not heat properly or shuts off unexpectedly
Possible Causes
- Open or faulty oven temperature sensor (RTD) (high)
- Damaged or open wiring/connector between the sensor and control board (medium)
- Electronic Oven Control (EOC)/control board misinterpreting sensor circuit (medium)
How to Fix Error F30
DIY Fix Basic Checks and Reset
- Turn off and disconnect power to the oven (unplug or switch off breaker).
- Wait 30 seconds to 1 minute, then restore power to see if the error clears (simple reset recommended by official support).
Technician Only Inspect and Test Oven Temperature Sensor and Wiring
- Disconnect power to the oven and access the oven cavity’s rear wall to locate the temperature sensor.
- Remove and test the sensor with a multimeter; expected resistance near ~1080–1100Ω at room temperature.
- Check continuity of wiring between the sensor and control board and inspect connectors for damage or corrosion.
- Replace the sensor or repair/replace wiring as needed based on test results.
Parts needed: Oven temperature sensor, Wiring harness/connectors
Technician Only Control Board Diagnosis or Replacement
- After verifying sensor and wiring are good, test the Electronic Oven Control (EOC) for correct sensor circuit readings.
- Replace the control board if it is misinterpreting sensor inputs and all other diagnostics check out.
Parts needed: Electronic Oven Control board
- If you are uncomfortable accessing internal components or working with electrical wiring
- If sensor and wiring check normal but error persists (likely control board issue).
Next step
Choose the next step for F30
Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.
Most relevant component to inspect
Temperature Sensor
Monitors the internal temperature to ensure correct operation and prevent overheating.
- Typical part-only price
- $15 - $35
- DIY difficulty
- Easy
- Estimated time
- 15-30 mins
Where can I find the model number?
Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.
Verify the complete model and part number on the retailer's compatibility page before ordering.
Other parts options
Check related components first; use model search as a fallback.
Wiring Harness
Connects controls, sensors, motors, and other electrical components inside the appliance.
Main Control Board
The central brain of the appliance that controls all components, cycles, and timings.
Model-compatible Oven parts
Enter the complete model number to browse compatible replacement parts. This is a model-based parts search, not a diagnosis that a specific component failed.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.
Optional routine care
Maintenance supplies
These products support cleaning or routine upkeep. They are separate from the possible repair components above and are not claimed to fix this error code or symptom.
Non-Scratch Cooktop Cleaner
A routine surface-care product. Confirm that it is approved for the specific glass, ceramic, enamel, or stainless finish.
Oven Thermometer
A diagnostic aid for comparing cavity temperature during a controlled check. It does not prove which internal component has failed.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. Recommendations are based on routine-care relevance, not commission rate.
Technical Specifications
| wattage | |
|---|---|
| component | Temperature Sensor |
| resistance | 1000-1100 ohms |
| part_number | 316217002 |
| voltage_rating | 120V AC |
Common Questions
What does F30 error mean on Frigidaire Oven?
F30 indicates a malfunction in the temperature sensor, causing erratic heating.
Can I fix Frigidaire Oven F30 error myself?
Yes, you can perform basic checks and resets; however, sensor replacement may require professional help.
How much does it cost to fix F30 error?
Repair costs range from $30 to $120 for parts, excluding labor.
When should I call a technician for F30?
Call a technician if you're uncomfortable with electrical work or if the issue persists after checking the sensor.
Sources & References
- Frigidaire Range Error Code F30 - Open Probe (official)
Data last verified: 2026-07-22
User Comments (0)
Share your experience or solution below.
Please login to post a comment.
Be the first to comment!