Frigidaire Oven Error F2
⚡ Quick Answer: The Frigidaire Oven F2 error indicates a malfunction in the temperature sensor, leading to inaccurate temperature readings or failure to heat properly... ✅ DIY Fixable
What Does Error F2 Mean?
The Frigidaire Oven F2 error indicates a malfunction in the temperature sensor, leading to inaccurate temperature readings or failure to heat properly. This issue often stems from a faulty temperature sensor or related circuit that fails to provide correct feedback to the control system, causing the oven to shut down or interrupt cooking cycles.
Common Symptoms:
- Oven displays F2 on the control panel
- Oven fails to heat to set temperature
- Oven may shut down or interrupt cooking cycle
Possible Causes
- Temperature sensor (RTD) malfunction (medium)
How to Fix Error F2
DIY Fix Basic checks and power reset
- Turn off the oven and disconnect power at the wall or circuit breaker.
- Wait 5–10 minutes then restore power to see if the F2 code clears.
- Observe if the oven now heats normally.
Technician Only Test and replace oven temperature sensor
- Disconnect power to the oven.
- Locate the oven temperature sensor (usually inside back wall).
- Measure resistance with a multimeter at room temperature; acceptable values around ~1050–1100 Ω.
- Replace the sensor if readings are out of range or inconsistent.
- After replacement, power oven and verify F2 no longer appears.
Parts needed: Oven temperature sensor (RTD)
- If the F2 error persists after sensor replacement or if other component failures (e.g., control board) are suspected.
- If you are uncomfortable performing multimeter testing or internal diagnostics.
Next step
Choose the next step for F2
Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.
Most relevant component to inspect
Temperature Sensor
Monitors the internal temperature to ensure correct operation and prevent overheating.
- Typical part-only price
- $15 - $35
- DIY difficulty
- Easy
- Estimated time
- 15-30 mins
Where can I find the model number?
Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.
Verify the complete model and part number on the retailer's compatibility page before ordering.
Other parts options
Check related components first; use model search as a fallback.
Model-compatible Oven parts
Enter the complete model number to browse compatible replacement parts. This is a model-based parts search, not a diagnosis that a specific component failed.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.
Optional routine care
Maintenance supplies
These products support cleaning or routine upkeep. They are separate from the possible repair components above and are not claimed to fix this error code or symptom.
Non-Scratch Cooktop Cleaner
A routine surface-care product. Confirm that it is approved for the specific glass, ceramic, enamel, or stainless finish.
Oven Thermometer
A diagnostic aid for comparing cavity temperature during a controlled check. It does not prove which internal component has failed.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. Recommendations are based on routine-care relevance, not commission rate.
Technical Specifications
| wattage | N/A |
|---|---|
| component | Temperature Sensor |
| resistance | 1000-1100 ohms |
| part_number | 316217002 |
| voltage_rating | 120V AC |
Common Questions
What does F2 error mean on Frigidaire Oven?
The F2 error indicates a malfunction in the temperature sensor, causing heating issues.
Can I fix Frigidaire Oven F2 error myself?
Yes, you can try basic checks like power cycling the oven to see if the error clears.
How much does it cost to fix F2 error?
The estimated cost to fix the F2 error is between 50–150 USD for the temperature sensor.
When should I call a technician for F2?
Call a technician if the error persists after replacing the sensor or if you're unsure about testing components.
Sources & References
Data last verified: 2026-07-22
User Comments (0)
Share your experience or solution below.
Please login to post a comment.
Be the first to comment!