Frigidaire Oven Error F10
⚡ Quick Answer: The Frigidaire oven F10 error indicates a temperature regulation malfunction, often due to a faulty temperature sensor or thermal runaway condition. T... ✅ DIY Fixable
What Does Error F10 Mean?
The Frigidaire oven F10 error indicates a temperature regulation malfunction, often due to a faulty temperature sensor or thermal runaway condition. This error can cause the oven to shut off heating, fail to maintain the set temperature, and may persist even after a power cycle. Inspecting and possibly replacing the temperature sensor is typically required to resolve this issue.
Common Symptoms:
- Oven shuts off heating and displays F10
- Oven fails to reach or maintain set temperature
- Error persists after basic power cycle
Possible Causes
- Faulty oven temperature sensor (RTD) (medium)
How to Fix Error F10
DIY Fix Basic checks and reset
- Turn off oven power via circuit breaker or unplug.
- Wait at least 5 minutes to allow cooling and reset electronic controls.
- Restore power and see if the error recurs before attempting use.
DIY Fix Inspect temperature sensor and wiring
- Locate the oven’s temperature sensor (usually in the back upper interior).
- Visually check for damage or loose wires.
- If equipped and comfortable with tools, measure sensor resistance at room temp. Replace sensor if readings are significantly out of range.
Technician Only Replace oven temperature sensor
- Confirm sensor failure via resistance test.
- Acquire correct replacement RTD sensor for model.
- Disconnect power and remove access panels.
- Remove old sensor and install new one with proper electrical connections.
- Restore power and test oven operation.
Parts needed: RTD/temperature sensor
Technician Only Inspect/repair wiring and control board
- Disconnect power and remove access panels.
- Inspect all wiring between sensor and control board for damage or loose connections.
- Replace wiring or connectors if necessary.
- If wiring is good but F10 persists, test and replace the main control board with model‑matched unit.
- Reassemble and test oven.
Parts needed: Wiring harness, Control board
- If basic reset doesn’t clear code and internal inspection is beyond user comfort level
- If control board replacement is suspected
- If actual overheating persists despite sensor/control board repair
Next step
Choose the next step for F10
Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.
Most relevant component to inspect
Temperature Sensor
Monitors the internal temperature to ensure correct operation and prevent overheating.
- Typical part-only price
- $15 - $35
- DIY difficulty
- Easy
- Estimated time
- 15-30 mins
Where can I find the model number?
Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.
Verify the complete model and part number on the retailer's compatibility page before ordering.
Other parts options
Check related components first; use model search as a fallback.
Wiring Harness
Connects controls, sensors, motors, and other electrical components inside the appliance.
Main Control Board
The central brain of the appliance that controls all components, cycles, and timings.
Model-compatible Oven parts
Enter the complete model number to browse compatible replacement parts. This is a model-based parts search, not a diagnosis that a specific component failed.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.
Optional routine care
Maintenance supplies
These products support cleaning or routine upkeep. They are separate from the possible repair components above and are not claimed to fix this error code or symptom.
Non-Scratch Cooktop Cleaner
A routine surface-care product. Confirm that it is approved for the specific glass, ceramic, enamel, or stainless finish.
Oven Thermometer
A diagnostic aid for comparing cavity temperature during a controlled check. It does not prove which internal component has failed.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. Recommendations are based on routine-care relevance, not commission rate.
Technical Specifications
| wattage | N/A |
|---|---|
| component | Temperature Sensor |
| resistance | 1000-1100 ohms |
| part_number | 316217002 |
| voltage_rating | 120V AC |
Common Questions
What does F10 error mean on frigidaire oven?
F10 indicates a malfunction in the temperature sensor, leading to heating issues.
Can I fix frigidaire oven F10 error myself?
Yes, you can perform basic checks, power resets, and inspect the temperature sensor.
How much does it cost to fix F10 error?
Repairing the F10 error typically costs $30–$80 for parts only.
When should I call a technician for F10?
Call a technician if the error persists after basic checks or if control board issues are suspected.
Sources & References
- Frigidaire Ranges Error Code F10 - Thermal Runaway (official)
- Frigidaire Oven F10 Error Code Guide (community)
Data last verified: 2026-07-25
User Comments (0)
Share your experience or solution below.
Please login to post a comment.
Be the first to comment!