Frigidaire Oven Error F0
⚡ Quick Answer: The Frigidaire oven F0 error indicates a malfunction in the Electronic Oven Control (EOC), which may cause the oven to be unresponsive or fail to star... ✅ DIY Fixable
What Does Error F0 Mean?
The Frigidaire oven F0 error indicates a malfunction in the Electronic Oven Control (EOC), which may cause the oven to be unresponsive or fail to start. This error can lead to erratic temperature readings and should be addressed promptly to ensure proper operation.
Common Symptoms:
- Oven may refuse to start or operate normally
- Error code displayed on control panel at power‑up or during use
- Oven buttons or functions may be unresponsive
Possible Causes
- Electronic Oven Control (EOC) failure (medium)
How to Fix Error F0
DIY Fix Basic Troubleshooting and Reset
- Disconnect the oven from power (unplug or turn off breaker)
- Wait 5–10 minutes
- Restore power and check if the F0 code clears
Technician Only Inspect and Replace Electronic Oven Control (EOC)
- Verify error code persists after a proper power reset
- Access oven control board and visually inspect for burnt components or loose connections
- Test EOC with appropriate diagnostic tools per service manual
- Replace EOC if defective
Parts needed: Electronic Oven Control board (EOC)
- If the error persists after power reset and you are uncomfortable accessing internal components
- If diagnostic tests confirm control board issues or if there are additional electrical concerns
Next step
Choose the next step for F0
Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.
Most relevant component to inspect
Main Control Board
The central brain of the appliance that controls all components, cycles, and timings.
- Typical part-only price
- $120 - $280
- DIY difficulty
- Medium
- Estimated time
- 20-40 mins
Where can I find the model number?
Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.
Verify the complete model and part number on the retailer's compatibility page before ordering.
Other parts options
Check related components first; use model search as a fallback.
Model-compatible Oven parts
Enter the complete model number to browse compatible replacement parts. This is a model-based parts search, not a diagnosis that a specific component failed.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.
Optional routine care
Maintenance supplies
These products support cleaning or routine upkeep. They are separate from the possible repair components above and are not claimed to fix this error code or symptom.
Non-Scratch Cooktop Cleaner
A routine surface-care product. Confirm that it is approved for the specific glass, ceramic, enamel, or stainless finish.
Oven Thermometer
A diagnostic aid for comparing cavity temperature during a controlled check. It does not prove which internal component has failed.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. Recommendations are based on routine-care relevance, not commission rate.
Technical Specifications
| wattage | N/A |
|---|---|
| component | Temperature Sensor |
| resistance | 1000-1100 ohms |
| part_number | 316217002 |
| voltage_rating | 120V AC |
Common Questions
What does F0 error mean on Frigidaire oven?
The F0 error indicates an Electronic Oven Control failure, leading to unresponsive buttons and erratic temperature readings.
Can I fix Frigidaire oven F0 error myself?
Yes, you can try basic troubleshooting by disconnecting the oven from power for 5–10 minutes before restoring it.
How much does it cost to fix F0 error?
Estimated repair costs for the F0 error range from $150 to $400, depending on parts and labor.
When should I call a technician for F0?
Call a technician if the error persists after a power reset or if you are uncomfortable accessing internal components.
Sources & References
Data last verified: 2026-07-22
User Comments (0)
Share your experience or solution below.
Please login to post a comment.
Be the first to comment!