Frigidaire Dishwasher Error RF

⚡ Quick Answer: The Frigidaire dishwasher RF error code indicates a problem with the rinse aid dispenser's reed switch, often signaling that the rinse aid is low or e... ✅ DIY Fixable

What Does Error RF Mean?

The Frigidaire dishwasher RF error code indicates a problem with the rinse aid dispenser's reed switch, often signaling that the rinse aid is low or empty. This error may cause the dishwasher to stop or pause operation. You may also notice unusual sounds during the washing cycle if there's a malfunction in the dispenser. To resolve this issue, check the rinse aid level and refill if necessary.

Common Symptoms:

  • RF appears on display when the dishwasher detects an issue with the rinse aid level/sensing
  • Dishwasher may stop or pause operation pending resolution

Possible Causes

  • Rinse aid dispenser reed switch open due to low or empty rinse aid (medium)
  • Obstruction or mechanical issue in rinse aid dispenser affecting reed switch function (low)

How to Fix Error RF

DIY Fix Refill and check rinse aid dispenser

  1. Open the rinse aid dispenser compartment
  2. Check the level of rinse aid and refill with an appropriate rinse aid product if low or empty
  3. Ensure the dispenser lid closes securely

Technician Only Inspect and test reed switch and dispenser assembly

  1. Disconnect power to the dishwasher
  2. Remove the rinse aid dispenser assembly
  3. Test the reed switch with a multimeter to confirm sensor operation
  4. Inspect wiring harness and connectors for damage or corrosion
  5. Replace dispenser assembly or reed switch if defective

Parts needed: rinse aid dispenser assembly, reed switch sensor, wiring/connectors

🛑 When to Call a Pro:
  • If the RF error persists after refilling rinse aid and checking the dispenser
  • If the reed switch or dispenser assembly shows electrical or mechanical failure during technician inspection

Next step

Choose the next step for RF

Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.

Based on diagnostic data

Most relevant component to inspect

Detergent Dispenser

Releases detergent, bleach, or rinse aid at the correct moment in the cycle.

Typical part-only price
$30 - $70
DIY difficulty
Easy
Estimated time
15-30 mins
Where can I find the model number?

Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.

Find a part that fits my model

Verify the complete model and part number on the retailer's compatibility page before ordering.

Other parts options

Check related components first; use model search as a fallback.

Possible related component

Wiring Harness

Connects controls, sensors, motors, and other electrical components inside the appliance.

$20 - $120 · Medium · 30-90 mins

Check fit & price
Model number required

Model-compatible Dishwasher parts

Enter the complete model number to browse compatible replacement parts. This is a model-based parts search, not a diagnosis that a specific component failed.

Find a part that fits my model

Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.

Optional routine care

Maintenance supplies

These products support cleaning or routine upkeep. They are separate from the possible repair components above and are not claimed to fix this error code or symptom.

Maintenance supply

Dishwasher Cleaner and Descaler

Supports routine removal of mineral scale, grease, and odor. It is maintenance, not a repair for a failed pump, valve, or control.

View maintenance supply
Maintenance supply

Braided Dishwasher Inlet Hose

For replacement of an externally damaged supply hose. Verify connection size, length, and appliance installation requirements before ordering.

View maintenance supply

Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. Recommendations are based on routine-care relevance, not commission rate.

Technical Specifications

wattage 60W
component Drain Pump Assembly
resistance 10-20 ohms
part_number 154567401
voltage_rating 120V AC

Common Questions

What does RF error mean on frigidaire dishwasher?

RF error indicates a problem with the rinse aid dispenser, often due to low rinse aid or a faulty reed switch.

Can I fix frigidaire dishwasher RF error myself?

Yes, you can refill the rinse aid dispenser and ensure the lid closes securely to potentially resolve the RF error.

How much does it cost to fix RF error?

Repair costs for the RF error typically range from $30 to $150 depending on the parts needed.

When should I call a technician for RF?

Call a technician if the RF error persists after refilling rinse aid or if there's a failure in the reed switch or dispenser assembly.

Data last verified: 2026-07-25

User Comments (0)

Share your experience or solution below.

Be the first to comment!