Frigidaire Dishwasher Error HS
⚡ Quick Answer: The Frigidaire dishwasher HS error indicates a malfunction in the hall sensor related to the motor assembly. This error is often accompanied by the HS... ⚠️ Difficulty Varies
What Does Error HS Mean?
The Frigidaire dishwasher HS error indicates a malfunction in the hall sensor related to the motor assembly. This error is often accompanied by the HS code appearing on the control panel, causing the dishwasher to stop operation. Users may also notice clicking sounds or unusual behavior during motor operation. Common causes include a fault in the hall sensor or issues with the wiring between the motor and control board.
Common Symptoms:
- HS displayed on control panel
- Dishwasher stops operation when code appears
- Possible clicking sounds or abnormal behavior during motor operation
Possible Causes
- Hall sensor fault in wash/motor assembly (medium)
- Wiring or connection issues between motor and control board (medium)
How to Fix Error HS
DIY Fix Basic checks and resets
- Power off dishwasher completely (turn off breaker or unplug).
- Wait 5 minutes then restore power and attempt restart.
- Confirm door is fully closed and latched properly.
- Observe if HS error reappears.
Technician Only Inspect motor hall sensor and wiring
- Disconnect power to the dishwasher.
- Remove access panels to locate motor and hall sensor assembly.
- Inspect wiring harness from motor/hall sensor to main control board for damage or loose connections.
- Test hall sensor continuity per service manual.
- Replace motor/hall sensor assembly if defective.
- Verify main control board connections; replace board only if fault persists after motor/hall sensor replacement.
Parts needed: motor with hall sensor, wiring harness, possibly control board
- If error persists after basic resets and wiring inspection.
- If you are not comfortable accessing internal components or diagnosing electrical faults.
Next step
Choose the next step for HS
Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.
Most relevant component to inspect
Wiring Harness
Connects controls, sensors, motors, and other electrical components inside the appliance.
- Typical part-only price
- $20 - $120
- DIY difficulty
- Medium
- Estimated time
- 30-90 mins
Where can I find the model number?
Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.
Verify the complete model and part number on the retailer's compatibility page before ordering.
Other parts options
Check related components first; use model search as a fallback.
Main Control Board
The central brain of the appliance that controls all components, cycles, and timings.
Model-compatible Dishwasher parts
Enter the complete model number to browse compatible replacement parts. This is a model-based parts search, not a diagnosis that a specific component failed.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.
Optional routine care
Maintenance supplies
These products support cleaning or routine upkeep. They are separate from the possible repair components above and are not claimed to fix this error code or symptom.
Dishwasher Cleaner and Descaler
Supports routine removal of mineral scale, grease, and odor. It is maintenance, not a repair for a failed pump, valve, or control.
Braided Dishwasher Inlet Hose
For replacement of an externally damaged supply hose. Verify connection size, length, and appliance installation requirements before ordering.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. Recommendations are based on routine-care relevance, not commission rate.
Technical Specifications
| wattage | 1500W |
|---|---|
| component | Heating Element |
| resistance | 10-30 ohms |
| part_number | 154827101 |
| voltage_rating | 120V AC |
Common Questions
What does HS error mean on Frigidaire dishwasher?
HS error indicates a hall sensor malfunction in the motor assembly, halting operation.
Can I fix Frigidaire dishwasher HS error myself?
Yes, try resetting the dishwasher and checking the door latch. If the issue persists, consider professional help.
How much does it cost to fix HS error?
Repair costs for the HS error range from $150 to $450, depending on parts and labor.
When should I call a technician for HS?
Call a technician if the error persists after resets or if you're uncomfortable with internal repairs.
Sources & References
Data last verified: 2026-07-25
User Comments (0)
Share your experience or solution below.
Please login to post a comment.
Be the first to comment!