Frigidaire Dishwasher Error ER

⚡ Quick Answer: The Frigidaire dishwasher error code 'ER' indicates a malfunction in the control panel, often linked to a faulty membrane switch or keypad. This issue... ✅ DIY Fixable

What Does Error ER Mean?

The Frigidaire dishwasher error code 'ER' indicates a malfunction in the control panel, often linked to a faulty membrane switch or keypad. This issue may prevent buttons from functioning correctly, resulting in the error message appearing immediately upon starting the dishwasher or when pressing control buttons. Unusual noises may also accompany this error, signaling deeper problems that require attention.

Common Symptoms:

  • Dishwasher displays "ER" on control panel
  • Buttons may be unresponsive or stuck
  • Error appears immediately on start or when pressing control buttons

Possible Causes

  • Faulty membrane switch/control panel keypad (high)
  • Loose/damaged wiring between keypad and main control board (medium)

How to Fix Error ER

DIY Fix Check and clear stuck or pressed keys

  1. Inspect the control panel for any stuck, pressed, or damaged buttons
  2. Gently press and release each button to ensure it moves freely
  3. Clean around buttons with a dry cloth to remove debris

DIY Fix Power reset the dishwasher

  1. Turn off power at the circuit breaker or unplug the dishwasher
  2. Wait 1–2 minutes
  3. Restore power and attempt to run a cycle

Technician Only Inspect and repair control panel wiring

  1. Disconnect power to the dishwasher
  2. Remove the outer panel to access control panel and wiring
  3. Check all connections between keypad and main control board for looseness, corrosion, or damage
  4. Repair or replace wiring/connectors as needed
  5. Reassemble and test the dishwasher

Parts needed: Control panel keypad harness, Connectors

Technician Only Replace control panel/keypad assembly

  1. Verify ER persists after basic troubleshooting
  2. Obtain correct replacement control panel/keypad for model
  3. Disconnect dishwasher power
  4. Remove old control panel and install new assembly
  5. Reconnect power and test

Parts needed: Control panel/keypad assembly

🛑 When to Call a Pro:
  • If ER persists after checking buttons and power reset
  • If wiring appears damaged or corrosion is found
  • If replacement parts are required beyond basic user action

Next step

Choose the next step for ER

Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.

Check during diagnosis

Most relevant component to inspect

Main Control Board

The central brain of the appliance that controls all components, cycles, and timings.

Typical part-only price
$120 - $280
DIY difficulty
Medium
Estimated time
20-40 mins
Where can I find the model number?

Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.

Find a part that fits my model

Verify the complete model and part number on the retailer's compatibility page before ordering.

Other parts options

Check related components first; use model search as a fallback.

Possible related component

Drain Pump

Pumps waste water out of the appliance during the drain cycle.

$35 - $80 · Easy · 15-30 mins

Check fit & price
Model number required

Model-compatible Dishwasher parts

Enter the complete model number to browse compatible replacement parts. This is a model-based parts search, not a diagnosis that a specific component failed.

Find a part that fits my model

Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.

Optional routine care

Maintenance supplies

These products support cleaning or routine upkeep. They are separate from the possible repair components above and are not claimed to fix this error code or symptom.

Maintenance supply

Dishwasher Cleaner and Descaler

Supports routine removal of mineral scale, grease, and odor. It is maintenance, not a repair for a failed pump, valve, or control.

View maintenance supply
Maintenance supply

Braided Dishwasher Inlet Hose

For replacement of an externally damaged supply hose. Verify connection size, length, and appliance installation requirements before ordering.

View maintenance supply

Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. Recommendations are based on routine-care relevance, not commission rate.

Technical Specifications

wattage 60W
component Drain Pump Assembly
resistance 10-30 ohms
part_number 154567401
voltage_rating 120V AC

Common Questions

What does ER error mean on Frigidaire dishwasher?

The ER error indicates a malfunction in the control panel, often due to a faulty membrane switch.

Can I fix Frigidaire dishwasher ER error myself?

Yes, check for stuck buttons and perform a power reset to potentially resolve the issue.

How much does it cost to fix ER error?

Repair costs for the ER error range from $30 to $100 for parts, depending on the specific components needed.

When should I call a technician for ER?

Call a technician if the error persists after troubleshooting, or if wiring appears damaged.

Sources & References

Data last verified: 2026-07-25

User Comments (0)

Share your experience or solution below.

Be the first to comment!