Frigidaire Dishwasher Error RA

⚡ Quick Answer: The Frigidaire dishwasher RA error indicates a rinse aid reed switch failure, affecting the rinse aid dispenser's ability to recognize levels or dispe... ✅ DIY Fixable

What Does Error RA Mean?

The Frigidaire dishwasher RA error indicates a rinse aid reed switch failure, affecting the rinse aid dispenser's ability to recognize levels or dispense properly. This error may also produce unusual noises during operation and typically arises from an empty rinse aid reservoir, a faulty reed switch, or wiring issues between the dispenser and main control board.

Common Symptoms:

  • Dishwasher displays RA on panel
  • Dishwasher may not recognize rinse aid level or dispense rinse aid properly

Possible Causes

  • Empty or low rinse aid reservoir (medium)
  • Faulty rinse aid reed switch or dispenser assembly (medium)
  • Wiring issue between dispenser and main control board (medium)

How to Fix Error RA

DIY Fix Check and refill rinse aid

  1. Open dishwasher rinse aid dispenser
  2. Ensure the dispenser is filled to recommended level
  3. Secure cap and restart dishwasher cycle
  4. Check if RA code clears

Technician Only Inspect dispenser and wiring

  1. Disconnect power to dishwasher
  2. Remove inner door panel to access dispenser wiring
  3. Check wiring harness and connectors for damage or loose connection
  4. Test rinse aid reed switch for continuity
  5. Replace dispenser assembly if switch is faulty

Parts needed: Rinse aid dispenser assembly, Wiring harness/connectors

🛑 When to Call a Pro:
  • If error persists after refill and visual wiring inspection
  • If internal components (reed switch, dispenser) are damaged or difficult to access

Technical Specifications

wattage 60W
component Drain Pump
resistance 10-30 ohms
part_number 154567401
voltage_rating 120V AC

Common Questions

What does RA error mean on frigidaire dishwasher?

RA error signifies a rinse aid reed switch failure, preventing proper rinse aid dispensing.

Can I fix frigidaire dishwasher RA error myself?

Yes, check and refill the rinse aid dispenser, then restart the dishwasher.

How much does it cost to fix RA error?

Repair costs range from $50 to $200 for parts, depending on the model.

When should I call a technician for RA?

Call a technician if the error persists after refill or if internal components are damaged.

Data last verified: 2026-07-07

User Comments (0)

Share your experience or solution below.

Be the first to comment!