Frigidaire Dishwasher Error CE

⚡ Quick Answer: The CE error on a Frigidaire dishwasher indicates a communication or configuration issue between the control panel and the main control board. This er... ✅ DIY Fixable

What Does Error CE Mean?

The CE error on a Frigidaire dishwasher indicates a communication or configuration issue between the control panel and the main control board. This error may cause the dishwasher to stop mid-cycle, fail to start, or display the CE code immediately when powered on. It may also be accompanied by unusual noises, pointing to potential wiring problems or a faulty connection.

Common Symptoms:

  • Dishwasher displays CE on control panel
  • May stop mid‑cycle or refuse to start
  • Occurs immediately upon powering on

Possible Causes

  • Configuration/communication error between keypad/control panel and main control board (medium)
  • Faulty wiring connection or loose/disconnected harness (medium)

How to Fix Error CE

DIY Fix Basic checks and reset

  1. Ensure dishwasher door is fully closed and latched
  2. Turn off power at circuit breaker or unplug dishwasher for 5 minutes
  3. Restore power to see if CE clears

Technician Only Inspect and repair wiring/connectors

  1. Disconnect power and remove access panels
  2. Inspect wiring harness between keypad/control panel and main control board for loose, damaged, or corroded connections
  3. Repair or replace damaged connectors/wires
  4. Reassemble and test dishwasher

Parts needed: Control panel harness, Wiring connectors

🛑 When to Call a Pro:
  • If error persists after basic reset and visual wiring check
  • If wiring damage or board fault is suspected

Next step

Choose the next step for CE

Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.

Based on diagnostic data

Most relevant component to inspect

Wiring Harness

Connects controls, sensors, motors, and other electrical components inside the appliance.

Typical part-only price
$20 - $120
DIY difficulty
Medium
Estimated time
30-90 mins
Where can I find the model number?

Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.

Find a part that fits my model

Verify the complete model and part number on the retailer's compatibility page before ordering.

Other parts options

Check related components first; use model search as a fallback.

Model number required

Model-compatible Dishwasher parts

Enter the complete model number to browse compatible replacement parts. This is a model-based parts search, not a diagnosis that a specific component failed.

Find a part that fits my model

Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.

Optional routine care

Maintenance supplies

These products support cleaning or routine upkeep. They are separate from the possible repair components above and are not claimed to fix this error code or symptom.

Maintenance supply

Dishwasher Cleaner and Descaler

Supports routine removal of mineral scale, grease, and odor. It is maintenance, not a repair for a failed pump, valve, or control.

View maintenance supply
Maintenance supply

Braided Dishwasher Inlet Hose

For replacement of an externally damaged supply hose. Verify connection size, length, and appliance installation requirements before ordering.

View maintenance supply

Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. Recommendations are based on routine-care relevance, not commission rate.

Technical Specifications

wattage 60W
component Drain Pump
resistance 10-15 ohms
part_number 154576401
voltage_rating 120V AC

Common Questions

What does CE error mean on frigidaire dishwasher?

CE error indicates a communication/configuration issue between the control panel and main control board.

Can I fix frigidaire dishwasher CE error myself?

Yes, perform basic checks like ensuring the door is closed and reset the dishwasher.

How much does it cost to fix CE error?

Repair costs for the CE error typically range from $50 to $150.

When should I call a technician for CE?

Call a technician if the error persists after basic resets or if wiring damage is suspected.

Data last verified: 2026-07-25

User Comments (0)

Share your experience or solution below.

Be the first to comment!