Frigidaire Dishwasher Error PF

DIY Fix Reset dishwasher after PF code

1. Press and hold the Start/Cancel button to clear the error (per Frigidaire).
2. If panel reset doesn’t clear code, turn off power at circuit breaker or unplug dishwasher for ~5 minutes and restore.
3. Close dishwasher door and attempt a new wash cycle.

DIY Fix Check household power supply

1. Verify other appliances on same circuit are functioning.
2. Check circuit breaker panel and reset any tripped breakers.
3. Use a multimeter to confirm outlet voltage meets required specs for dishwasher.
4. Inspect power cord and outlet for damage or loose connections.

Technician Only Inspect hardwired connections and wiring

1. Turn off power at breaker.
2. Access junction box and verify wire nuts/tight connections.
3. Check for burnt wires or signs of short circuits.
4. Test door latch switch continuity to rule out intermittent power cut from faulty door system.

Parts needed: junction box wire nuts, door latch switch

Technician Only Evaluate control board and internal components

1. With power off, remove access panels.
2. Visually inspect control board for damage or burn marks.
3. Test voltage regulation circuitry and replace control board if defective.

Parts needed: control board