Frigidaire Dishwasher Error I60

⚡ Quick Answer: The Frigidaire dishwasher error I60 indicates a malfunction in the heating system, preventing the water from reaching the desired temperature. This is... ✅ DIY Fixable

What Does Error I60 Mean?

The Frigidaire dishwasher error I60 indicates a malfunction in the heating system, preventing the water from reaching the desired temperature. This issue often results in long cycle times, insufficient drying of dishes, and the display of the error code on the control panel. Common causes include a faulty heating element, temperature sensor, or control board failures. Addressing this error promptly is essential to restore proper functionality.

Common Symptoms:

  • Water not heating during cycle
  • Unusually long cycle times
  • Dishes not drying well
  • Error code I60 displayed on control panel

Possible Causes

  • Heating element failure or malfunction (medium)
  • Faulty temperature sensor/thermostat (medium)
  • Control board/heater relay not energizing heater (medium)
  • Inadequate incoming water temperature (medium)

How to Fix Error I60

DIY Fix Basic checks and reset

  1. Cancel current cycle and turn off dishwasher power for at least 5 minutes (soft reset)
  2. Ensure hot water supply to dishwasher is present by running sink hot water then starting a new cycle
  3. Verify water at dishwasher inlet is not too cold before starting

Technician Only Diagnose and repair heating system components

  1. Disconnect power at breaker and access internal heater assembly
  2. Test heating element continuity with multimeter; replace if open or out of spec
  3. Test thermostat/temperature sensor; replace if out of spec
  4. Inspect control board heater relay; replace control board if relay fails
  5. Verify wiring/connectors between control board, heater and sensor

Parts needed: heating element, temperature sensor/thermostat, control board

🛑 When to Call a Pro:
  • If error persists after reset and basic checks
  • If multimeter testing of heating circuits indicates faults
  • If control board is suspected faulty

Technical Specifications

wattage 50W
component Drain Pump
resistance 10-20 ohms
part_number 154567401
voltage_rating 120V AC

Common Questions

What does I60 error mean on frigidaire dishwasher?

The I60 error indicates a heating system malfunction, causing water not to reach the required temperature.

Can I fix frigidaire dishwasher I60 error myself?

Yes, you can perform basic checks like resetting the machine and ensuring hot water supply.

How much does it cost to fix I60 error?

Estimated repair costs range from $100 to $400+, depending on parts and labor.

When should I call a technician for I60?

Call a technician if the error persists after basic checks or if there are faults in the heating circuits.

Data last verified: 2026-02-19

User Comments (0)

Share your experience or solution below.

Be the first to comment!