Frigidaire Dishwasher Error CL

⚡ Quick Answer: The Frigidaire dishwasher error code CL indicates that the door is not securely closed. This prevents the dishwasher from starting any cycle. To resol... ✅ DIY Fixable

What Does Error CL Mean?

The Frigidaire dishwasher error code CL indicates that the door is not securely closed. This prevents the dishwasher from starting any cycle. To resolve this issue, ensure the door is fully latched and check for any obstructions on the gasket or bumper that may hinder closure. If the door is closed properly and the error persists, it may indicate a faulty door switch or wiring problem.

Common Symptoms:

  • Dishwasher displays CL on panel
  • Dishwasher will not start cycle when error is present
  • Door appears not fully latched or closed

Possible Causes

  • Door not properly closed or latched (high)
  • Faulty door switch or wiring between switch and control board (medium)

How to Fix Error CL

DIY Fix Check and properly close dishwasher door

  1. Open the dishwasher door fully
  2. Inspect for obstructions on the gasket or bumper that prevent latch engagement
  3. Remove any utensils or debris blocking door closure
  4. Firmly close the door ensuring the latch engages

DIY Fix Inspect door switches and wiring

  1. Unplug the dishwasher or turn off power at circuit breaker
  2. Access the door switch assembly (usually behind the inner door panel)
  3. Visually inspect switches and wiring harness for damage or disconnection
  4. If safe, press switches manually to see if contacts engage
  5. Reassemble and test

Technician Only Replace faulty door switch or repair wiring

  1. Diagnose which door switch (primary or secondary) fails to signal closure
  2. Remove and replace defective door switch component
  3. Repair or replace damaged wiring harness as needed
  4. Test dishwasher operation to verify CL error is resolved

Parts needed: door switch assembly, possibly wiring harness

🛑 When to Call a Pro:
  • If door closure and switch inspection do not clear CL error
  • If evidence of control board malfunction persists after basic troubleshooting

Next step

Choose the next step for CL

Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.

Based on diagnostic data

Most relevant component to inspect

Door or Lid Switch

Detects whether the appliance door or lid is safely closed before operation.

Typical part-only price
$15 - $55
DIY difficulty
Medium
Estimated time
20-45 mins
Where can I find the model number?

Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.

Find a part that fits my model

Verify the complete model and part number on the retailer's compatibility page before ordering.

Other parts options

Check related components first; use model search as a fallback.

Possible related component

Wiring Harness

Connects controls, sensors, motors, and other electrical components inside the appliance.

$20 - $120 · Medium · 30-90 mins

Check fit & price
Model number required

Model-compatible Dishwasher parts

Enter the complete model number to browse compatible replacement parts. This is a model-based parts search, not a diagnosis that a specific component failed.

Find a part that fits my model

Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.

Optional routine care

Maintenance supplies

These products support cleaning or routine upkeep. They are separate from the possible repair components above and are not claimed to fix this error code or symptom.

Maintenance supply

Dishwasher Cleaner and Descaler

Supports routine removal of mineral scale, grease, and odor. It is maintenance, not a repair for a failed pump, valve, or control.

View maintenance supply
Maintenance supply

Braided Dishwasher Inlet Hose

For replacement of an externally damaged supply hose. Verify connection size, length, and appliance installation requirements before ordering.

View maintenance supply

Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. Recommendations are based on routine-care relevance, not commission rate.

Technical Specifications

wattage
component Control Panel
resistance
part_number
voltage_rating 120V AC

Common Questions

What does CL error mean on Frigidaire dishwasher?

CL error means the door is not securely closed, preventing the dishwasher from starting.

Can I fix Frigidaire dishwasher CL error myself?

Yes, check and close the door properly, and inspect door switches and wiring for issues.

How much does it cost to fix CL error?

Repairing the CL error costs between $30-$150 for parts, plus labor.

When should I call a technician for CL?

Call a technician if the door closure and switch inspection do not resolve the error.

Sources & References

Data last verified: 2026-07-25

User Comments (0)

Share your experience or solution below.

Be the first to comment!