Samsung Dishwasher: not turning on
What is this symptom?
Is your Samsung dishwasher not turning on? You may notice no lights or sounds when pressing the power button. This issue could be due to a power supply interruption, a faulty control board, or a blown thermal fuse. In this guide, we’ll explore common causes and effective solutions to help you get your dishwasher running again.
Important Tips for Samsung Models
- Samsung support specifically lists resetting circuit breaker and checking door latch control settings (Child Lock, Delay Start) as troubleshooting steps before service.
Possible Causes
No power reaching the dishwasher
How to Identify: Dishwasher shows no lights or sounds; other appliances on same outlet also don’t power; breaker is tripped
Part: Power supply / outlet / breaker
Control board or internal electronics fault
How to Identify: Dishwasher shows no response even after checking power and door; may show error codes if panel partially powers
Part: Control board
Thermal fuse blown
How to Identify: Dishwasher shows no power, multimeter continuity test indicates open fuse
Part: Thermal fuse
DIY Solutions
Check and Restore Power Supply
- Plug another device into the dishwasher’s outlet to confirm power
- Check home breaker panel for tripped breaker and reset if necessary
- Ensure dishwasher power cord is firmly plugged in
Ensure Door Is Properly Closed and Latched
- Open and firmly close dishwasher door until it clicks
- Inspect latch for obstruction or debris
- Try starting dishwasher again
Disable Child Lock or Delay Start
- Check dishwasher display for child lock or delay indicators
- Hold appropriate button combination to disable child lock per manual
- Cancel any delay start setting and try to start
Soft Reset of Dishwasher Power
- Turn off breaker feeding dishwasher or unplug unit
- Wait 5-10 minutes
- Restore power and attempt to start
Next step
Choose the next step for not turning on
Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.
Most relevant component to inspect
Main Control Board
The central brain of the appliance that controls all components, cycles, and timings.
- Typical part-only price
- $120 - $280
- DIY difficulty
- Medium
- Estimated time
- 20-40 mins
Where can I find the model number?
Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.
Verify the complete model and part number on the retailer's compatibility page before ordering.
Other parts options
Check related components first; use model search as a fallback.
Thermal Fuse
A safety device that cuts off power to the appliance if it starts to overheat.
Model-compatible Dishwasher parts
Enter the complete model number to browse compatible replacement parts. This is a model-based parts search, not a diagnosis that a specific component failed.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.
Optional routine care
Maintenance supplies
These products support cleaning or routine upkeep. They are separate from the possible repair components above and are not claimed to fix this error code or symptom.
Dishwasher Cleaner and Descaler
Supports routine removal of mineral scale, grease, and odor. It is maintenance, not a repair for a failed pump, valve, or control.
Braided Dishwasher Inlet Hose
For replacement of an externally damaged supply hose. Verify connection size, length, and appliance installation requirements before ordering.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. Recommendations are based on routine-care relevance, not commission rate.
Professional Repairs
Replace Control Board
Replace Thermal Fuse
When to Call a Professional
Preventive Maintenance
-
Regularly check door latch and clean around it: False door open conditions that prevent startup
Frequency: monthly -
Test outlet and breaker periodically: Power-related startup failures
Frequency: annually
Frequently Asked Questions
Why is my Samsung Dishwasher not turning on?
How do I fix Samsung Dishwasher not turning on myself?
How much does it cost to fix not turning on?
When should I call a technician for not turning on?
References & Sources
Community Analytical Insights
Guidance from available sources; statistical claims are shown only for samples of at least 10 discussions
Common Issues Reported by Users
- Power supply issue (tripped circuit breaker or blown fuse)
- Door latch not engaging properly
- Control panel malfunction
User Suggested Solutions
-
Check the power supply by ensuring the dishwasher is plugged in and the circuit breaker is not tripped. Reset the breaker if necessary.
-
Inspect the door latch for any obstructions or damage. Ensure it closes securely. Replace the latch if it is faulty.
-
Test the control panel for any signs of damage or malfunction. If it appears faulty, consider replacing the control panel.
Limited-source guidance; percentages and success-rate claims are not shown
View
Sources
Data compiled from real discussions on r/appliancerepair and r/Appliances:
User Comments (0)
Share your experience or solution below.
Please login to post a comment.
Be the first to comment!