Samsung Dishwasher: leak error code
What is this symptom?
If your Samsung dishwasher displays an LE or LC error code, it indicates that the internal leak sensor has detected moisture where it shouldn't, potentially halting operations. This issue may arise with or without visible leaks, pointing to various causes from overfilled detergent to actual component leaks.
Important Tips for Samsung Models
- LE and LC error codes indicate that moisture was detected where it shouldn’t be, and dishwasher attempts to drain water automatically when triggered
Possible Causes
Internal moisture detected by leak sensor without visible external leakage
How to Identify: LC or LE code displayed with little or no visible water outside; moisture detected in base pan or around sensor
Part: Leak sensor / base tray
Excess suds or overfilled detergent causing moisture/overflow trigger
How to Identify: LC code with foamy suds inside dishwasher; error appears after heavy sudsing cycles
Part: Detergent dispenser / interior wash action
Actual component leak (spray arm, hose, gasket or valve)
How to Identify: Water visible on floor or around dishwasher; damaged hose or cracked spray arm; water in base tray
Part: Door gasket, spray arms, inlet valve, drain hose
Improper installation / leveling causing water pooling
How to Identify: Dishwasher not level; water pooling near door bass; LC/LE codes appear after cycles
Part: Dishwasher leveling legs / installation alignment
Faulty leak sensor or wiring malfunction
How to Identify: Error persists after drying and leak fixes; sensor triggers false positives; no external signs of water
Part: Leak detection sensor or control board wiring
DIY Solutions
Dry moisture from base and reset error
- Turn off and unplug the dishwasher or turn off circuit breaker
- Open access panel or door and dry any moisture from base tray and around leak sensor
- Wait for moisture to evaporate or use a towel to soak it up
- Restore power and run a short cycle to check if LC/LE code clears
Check and reduce sudsing
- Ensure correct dishwasher detergent is used
- Avoid using regular dish soap or excessive detergent
- Wipe up any suds inside dishwasher before running next cycle
Inspect visible seals and hoses for leaks
- Turn off and unplug dishwasher
- Inspect door gasket for cracks or misalignment
- Check drain hose and inlet hose connections for drips or moisture
- Tighten loose clamps or replace visibly damaged hoses
Next step
Choose the next step for leak error code
Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.
Most relevant component to inspect
Detergent Dispenser
Releases detergent, bleach, or rinse aid at the correct moment in the cycle.
- Typical part-only price
- $30 - $70
- DIY difficulty
- Easy
- Estimated time
- 15-30 mins
Where can I find the model number?
Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.
Verify the complete model and part number on the retailer's compatibility page before ordering.
Other parts options
Check related components first; use model search as a fallback.
Door Gasket
Creates a watertight seal around the door to prevent leaks during operation.
Drain Hose
Carries waste water from the drain pump to your home's standpipe or sink drain.
Appliance Leveling Leg
Supports and levels the appliance to reduce rocking, vibration, and door-alignment problems.
Model-compatible Dishwasher parts
Enter the complete model number to browse compatible replacement parts. This is a model-based parts search, not a diagnosis that a specific component failed.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.
Optional routine care
Maintenance supplies
These products support cleaning or routine upkeep. They are separate from the possible repair components above and are not claimed to fix this error code or symptom.
Dishwasher Cleaner and Descaler
Supports routine removal of mineral scale, grease, and odor. It is maintenance, not a repair for a failed pump, valve, or control.
Braided Dishwasher Inlet Hose
For replacement of an externally damaged supply hose. Verify connection size, length, and appliance installation requirements before ordering.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. Recommendations are based on routine-care relevance, not commission rate.
Professional Repairs
Replace faulty leak sensor or electronic component
Replace spray arms, gaskets, or internal hoses
When to Call a Professional
Preventive Maintenance
-
Inspect door gasket and hoses: Leaks and moisture buildup triggering leak sensor
Frequency: monthly -
Use proper dishwasher detergent: Excess suds that may trigger LC error
Frequency: every cycle
Frequently Asked Questions
Why is my Samsung Dishwasher leak error code?
How do I fix Samsung Dishwasher leak error code myself?
How much does it cost to fix leak error code?
When should I call a technician for leak error code?
References & Sources
Community Analytical Insights
Guidance from available sources; statistical claims are shown only for samples of at least 10 discussions
Common Issues Reported by Users
- Damaged door seal or gasket causing water to leak during operation.
- Clogged or damaged drain hose leading to water backup and leaks.
- Faulty water inlet valve allowing excess water into the dishwasher.
User Suggested Solutions
-
Inspect the door seal for any cracks or wear. Replace it if damaged. Ensure the door closes properly to prevent leaks.
-
Check the drain hose for kinks or clogs. Clean or replace the hose if necessary to ensure proper drainage.
-
Test the water inlet valve for proper function. Replace it if it is leaking or not closing properly.
Limited-source guidance; percentages and success-rate claims are not shown
View
Sources
Data compiled from real discussions on r/appliancerepair and r/Appliances:
User Comments (0)
Share your experience or solution below.
Please login to post a comment.
Be the first to comment!