Samsung Dishwasher: excess water

Professional Repair Guide

What is this symptom?

Is your Samsung dishwasher retaining excess water after a wash cycle? This issue can lead to water detection errors. Common causes include a clogged filter, blocked drain hose, or a malfunctioning drain pump. Regular maintenance can help prevent these problems and ensure your dishwasher operates efficiently.

Urgency: Medium

Important Tips for Samsung Models

  • Some Samsung models display an over‑level water error when excess water is detected; this can be linked to float or sensor issues in addition to drain issues.

Possible Causes

Clogged filter or debris trap

How to Identify: Water pooling at bottom; visible food debris in the filter area when removed

Part: Dishwasher filter / debris trap

Drain hose kinked or blocked

How to Identify: Hose bent, kinked, or obstructed; water remains after cycle; possibly backflow from sink drain

Part: Drain hose

Drain pump or pump motor malfunction

How to Identify: No sound of pump running during drain phase; dishwasher retains water even after cleaning filters and hose

Part: Drain pump and motor assembly

Faulty check valve or drain solenoid

How to Identify: Water flows back into tub after draining; error codes for over‑level water may appear

Part: Check valve / drain solenoid

Normal residual water for trap design

How to Identify: Only small amounts of water remain below filter; no error codes; dishwasher otherwise functions normally

Part: Drain trap design

DIY Solutions

Clean dishwasher filter and debris trap

Easy 10-20 minutes
Tools Needed: gloves, soft brush
  1. Turn off and unplug dishwasher.
  2. Remove lower rack and locate filter assembly.
  3. Take out filter and remove debris with a soft brush.
  4. Rinse filter under warm water and reassemble.
  5. Run a short rinse cycle to check drainage.
⚠️ Safety First: Ensure dishwasher is powered off before removing filter.

Inspect and straighten drain hose

Moderate 15-30 minutes
Tools Needed: screwdriver (if needed), flashlight
  1. Turn off power and water supply.
  2. Access area under sink to locate drain hose.
  3. Check hose for kinks, pinches, or visible clogs.
  4. Straighten hose and clear blockages; reconnect securely.
  5. Run a test drain cycle to verify improvement.
⚠️ Safety First: Be cautious when moving cabinets or hoses to avoid damage.

Next step

Choose the next step for excess water

Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.

Other parts options

Check related components first; use model search as a fallback.

Possible related component

Drain Hose

Carries waste water from the drain pump to your home's standpipe or sink drain.

$15 - $30 · Easy · 15-30 mins

Check fit & price
Possible related component

Drain Pump

Pumps waste water out of the appliance during the drain cycle.

$35 - $80 · Easy · 15-30 mins

Check fit & price
Model number required

Model-compatible Dishwasher parts

Enter the complete model number to browse compatible replacement parts. This is a model-based parts search, not a diagnosis that a specific component failed.

Find a part that fits my model

Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.

Optional routine care

Maintenance supplies

These products support cleaning or routine upkeep. They are separate from the possible repair components above and are not claimed to fix this error code or symptom.

Maintenance supply

Dishwasher Cleaner and Descaler

Supports routine removal of mineral scale, grease, and odor. It is maintenance, not a repair for a failed pump, valve, or control.

View maintenance supply
Maintenance supply

Braided Dishwasher Inlet Hose

For replacement of an externally damaged supply hose. Verify connection size, length, and appliance installation requirements before ordering.

View maintenance supply

Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. Recommendations are based on routine-care relevance, not commission rate.

Professional Repairs

Replace drain pump or motor assembly

Estimated Cost: $80 - $200

Replace check valve or drain solenoid

Estimated Cost: $50 - $150

When to Call a Professional

No improvement after cleaning filter and hose
Loud unusual noises from pump area during operation
Error codes related to drainage persist

Preventive Maintenance

  • Clean filter monthly: Clogs leading to water retention
    Frequency: monthly
  • Check drain hose position and condition: Hose kinks and blockages causing drainage problems
    Frequency: every 3-6 months

Frequently Asked Questions

Why is my Samsung Dishwasher excess water?
Common causes include a clogged filter, blocked drain hose, or a malfunctioning drain pump.
How do I fix Samsung Dishwasher excess water myself?
You can clean the dishwasher filter and debris trap or inspect the drain hose for kinks.
How much does it cost to fix excess water?
Professional repairs range from $50 to $200, depending on the issue.
When should I call a technician for excess water?
If DIY solutions don't resolve the issue, or if you suspect a pump or valve malfunction, it's time to call a pro.

References & Sources

Community Analytical Insights

Guidance from available sources; statistical claims are shown only for samples of at least 10 discussions

Common Issues Reported by Users

  • Clogged drain filter or hose
  • Faulty door gasket
  • Malfunctioning float switch

User Suggested Solutions

  1. Check and clean the drain filter and hose. Remove the bottom rack, take out the filter, and rinse it under warm water. Inspect the drain hose for clogs and clear any debris.

  2. Inspect the door gasket for wear or damage. If the gasket is cracked or not sealing properly, replace it to prevent leaks.

  3. Test the float switch for proper operation. If the float is stuck or the switch is faulty, clean or replace the float switch as needed.

Limited-source guidance; percentages and success-rate claims are not shown
View Sources

Data compiled from real discussions on r/appliancerepair and r/Appliances:

  1. Samsung Dishwasher too much water

User Comments (0)

Share your experience or solution below.

Be the first to comment!