Maytag Washing Machine: not turning on

Possible Causes

Power supply interruption (outlet, breaker, cord)

How to Identify: No lights or display when pressing start; other devices also fail on same outlet; circuit breaker is tripped.

Part: Power cord / household circuit

Control panel or control lock engaged

How to Identify: Control panel appears dark or unresponsive even though power is present; control lock indicator may be lit or controls don’t respond.

Part: Control panel / user interface

Lid or door switch failure

How to Identify: Door not latching fully, washer will not start until door is fully closed; testing with multimeter shows no continuity across switch.

Part: Lid/door switch assembly

DIY Solutions

Verify household power and reset washer

Easy 10–15 minutes

Tools Needed: None

1. Ensure washer is fully plugged into outlet
2. Check household circuit breaker; reset if tripped
3. Test outlet with another device to confirm power
4. Unplug washer for 5 minutes to reset control panel then plug back in

⚠️ Safety First: Do not perform if outlet or breaker shows unsafe wiring signs.

Check lid/door closure and switch

Moderate 15–30 minutes

Tools Needed: Screwdriver, Multimeter (optional)

1. Open and close washer door firmly to ensure latch engages
2. Inspect door latch for debris or misalignment
3. Use multimeter to test lid/door switch for continuity (if comfortable)
4. Replace lid switch if it fails continuity test

⚠️ Safety First: Disconnect power before accessing internal components.

Next step

Choose the next step for not turning on

Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.

Based on diagnostic data

Most relevant component to inspect

Power Cord

Supplies mains power to the appliance and includes the model-specific plug and terminal connection.

Typical part-only price

$15 - $70

DIY difficulty

Medium

Estimated time

20-45 mins

Optional: enter your model number

Apply

Where can I find the model number?

Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.

Find a part that fits my model

Verify the complete model and part number on the retailer's compatibility page before ordering.

Other parts options

Check related components first; use model search as a fallback.

Possible related component

User Interface Board

Receives button or touch input and controls the appliance display and indicators.

$70 - $220 · Medium · 20-60 mins

Check fit & price

Possible related component

Door or Lid Switch

Detects whether the appliance door or lid is safely closed before operation.

$15 - $55 · Medium · 20-45 mins

Check fit & price

Model number required

Model-compatible Washing Machine parts

Enter the complete model number to browse compatible replacement parts. This is a model-based parts search, not a diagnosis that a specific component failed.

Find a part that fits my model

Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.

Optional routine care

Maintenance supplies

These products support cleaning or routine upkeep. They are separate from the possible repair components above and are not claimed to fix this error code or symptom.

Maintenance supply

Washing Machine Cleaner Tablets

Routine tub-cleaning supplies for residue and odor control. They do not repair a mechanical, drainage, or electronic fault.

View maintenance supply

Maintenance supply

Braided Washer Inlet Hoses

A maintenance replacement option for visibly worn external fill hoses. Verify thread size, length, and hot/cold connection requirements.

View maintenance supply

Maintenance supply

Washer Drain Hose Holder

Helps secure an external drain hose at the standpipe. It does not correct an internal pump or control fault.

View maintenance supply

Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. Recommendations are based on routine-care relevance, not commission rate.

Professional Repairs

Replace line or thermal fuse

Estimated Cost: $15–$50

Control board or user interface replacement

Estimated Cost: $100–$300

When to Call a Professional

Multimeter tests indicate multiple electrical faults

Control board replacement required

Power wiring or internal components suspected to be damaged

Preventive Maintenance

• Inspect power cord and outlet periodically: Issues due to damaged cord or poor power connection
  Frequency: annually
• Clean door latch and surrounding area: Door switch/latch misreads that prevent washer start
  Frequency: monthly

Frequently Asked Questions

Why is my Maytag Washing Machine not turning on?

Common causes include power supply interruptions, control panel lock, or lid switch failure.

How do I fix Maytag Washing Machine not turning on myself?

Start by checking the power supply and resetting the circuit breaker. Ensure the door latch is engaged.

How much does it cost to fix not turning on?

Professional repairs range from $15 for fuses to $300 for control board replacements.

When should I call a technician for not turning on?

If DIY solutions fail or you're unsure about testing electrical components, it's time to call a technician.

References & Sources

• Maytag Front Load Washer Not Starting or Operating Troubleshooting Official

Common Issues Reported by Users

• Control board failure (3 mentions)
• Door lock mechanism issue (2 mentions)
• Door switch malfunction (2 mentions)

User Suggested Solutions