Maytag Washing Machine: not finishing spin cycle
What is this symptom?
Is your Maytag washing machine failing to finish the spin cycle? This issue may manifest as stopping mid-spin, skipping high-speed spin, or leaving clothes excessively wet. Common causes include an unbalanced load, a faulty lid switch, or a clogged drain pump. Understanding these symptoms can help you troubleshoot effectively.
Important Tips for Maytag Models
- Some models will detect unbalanced loads and automatically adjust but still interrupt spin cycle; refer to error codes in owner’s manual for specific diagnostics
Possible Causes
Unbalanced or overloaded laundry load
How to Identify: Washer pauses or stops spin when bulky/heavy items clump on one side; thumping or vibration during spin; clothes still wet at end.
Part: Load distribution / suspension sensors
Faulty or misaligned lid/door switch
How to Identify: Washer won’t start or complete spin if lid isn’t detected as closed; sometimes error codes; no ‘click’ when closing lid.
Part: Lid/door switch assembly
Clogged drain pump or drain system
How to Identify: Water remains in tub; washer attempts to spin but stalls; gurgling sounds; standing water.
Part: Drain pump/filter/hoses
Worn or broken drive belt
How to Identify: Drum doesn’t spin though motor may hum; visual inspection shows cracks/stretching; belt loose.
Part: Drive belt
Faulty suspension rods or shock absorbers
How to Identify: Excessive vibration or rocking during spin; washer tilts, stops spin frequently.
Part: Suspension rods / shock absorbers
Control board or electronic failure
How to Identify: Washer stuck in cycle, unresponsive buttons, erratic behavior, error codes.
Part: Control board/timer
DIY Solutions
Redistribute and Balance Load
- Pause the washer mid‑cycle or open lid after it stops.
- Redistribute clothes evenly around drum to balance weight.
- Avoid mixing single heavy items alone; add similar weight items.
- Restart the spin cycle.
Clean Drain Pump and Filter
- Unplug washer and locate drain filter/pump access panel.
- Place towel/bucket under filter area.
- Remove filter cap and clear debris from pump and hose.
- Reinstall filter, secure panel, plug in and test spin cycle.
Inspect and Replace Drive Belt
- Unplug washer and access rear or bottom panel.
- Locate drive belt connecting motor to drum.
- Inspect for wear or break; remove and replace belt.
- Reassemble and test washer.
Next step
Choose the next step for not finishing spin cycle
Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.
Most relevant component to inspect
Door or Lid Switch
Detects whether the appliance door or lid is safely closed before operation.
- Typical part-only price
- $15 - $55
- DIY difficulty
- Medium
- Estimated time
- 20-45 mins
Where can I find the model number?
Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.
Verify the complete model and part number on the retailer's compatibility page before ordering.
Other parts options
Check related components first; use model search as a fallback.
Drain Pump
Pumps waste water out of the appliance during the drain cycle.
Drive Belt
Transfers rotational power from the motor to turn the drum or tub.
Washer Shock Absorber
Dampens tub movement and vibration during high-speed spin cycles.
Model-compatible Washing Machine parts
Enter the complete model number to browse compatible replacement parts. This is a model-based parts search, not a diagnosis that a specific component failed.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.
Optional routine care
Maintenance supplies
These products support cleaning or routine upkeep. They are separate from the possible repair components above and are not claimed to fix this error code or symptom.
Washing Machine Cleaner Tablets
Routine tub-cleaning supplies for residue and odor control. They do not repair a mechanical, drainage, or electronic fault.
Braided Washer Inlet Hoses
A maintenance replacement option for visibly worn external fill hoses. Verify thread size, length, and hot/cold connection requirements.
Washer Drain Hose Holder
Helps secure an external drain hose at the standpipe. It does not correct an internal pump or control fault.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. Recommendations are based on routine-care relevance, not commission rate.
Professional Repairs
Replace Lid/ Door Switch Assembly
Replace Suspension/Shock Absorbers
Control Board Replacement
When to Call a Professional
Preventive Maintenance
-
Clean drain pump filter: Drain clogs that hinder spin cycle
Frequency: monthly -
Balance loads properly: Unbalanced spin interruptions
Frequency: Every wash
Frequently Asked Questions
Why is my Maytag Washing Machine not finishing spin cycle?
How do I fix Maytag Washing Machine not finishing spin cycle myself?
How much does it cost to fix not finishing spin cycle?
When should I call a technician for not finishing spin cycle?
References & Sources
Community Analytical Insights
Guidance from available sources; statistical claims are shown only for samples of at least 10 discussions
Common Issues Reported by Users
- Unbalanced load causing the washer to stop spinning
- Faulty lid switch preventing spin cycle from engaging
- Clogged drain pump or hose preventing water from draining
User Suggested Solutions
-
Redistribute the load evenly in the drum. Remove some items if necessary to balance the load.
-
Check and test the lid switch for continuity. Replace if defective.
-
Inspect and clear any blockages in the drain pump and hose. Ensure the pump is functioning properly.
Limited-source guidance; percentages and success-rate claims are not shown
View
Sources
Data compiled from real discussions on r/appliancerepair and r/Appliances:
User Comments (0)
Share your experience or solution below.
Please login to post a comment.
Be the first to comment!