Maytag Washing Machine: making noise

Professional Repair Guide

What is this symptom?

Is your Maytag washing machine making loud or unusual noises during wash or spin cycles? Common sounds like knocking, thumping, or buzzing can indicate issues such as an unbalanced load, leveling problems, or foreign objects in the drum. Understanding these symptoms is crucial for effective troubleshooting and repair.

Urgency: Medium

Important Tips for Maytag Models

  • Hoses knocking against cabinet can cause thumping noise; secure hoses with supplied straps.
  • Shift actuator on some top‑load models can wear and cause noise; inspect if unusual sounds during agitation.

Possible Causes

Unbalanced load or uneven laundry distribution

How to Identify: Noise during spin, loud thumping; clothes cluster on one side; vibration and movement of washer.

Part: Drum/Load

Leveling/installation issues

How to Identify: Washer rocks on floor, uneven vibration and noise; worse during high-speed spin.

Part: Washer feet/Installation

Foreign objects in drum or hoses

How to Identify: Rattling or metallic noises; check drum interior or drain area; find coins or small items.

Part: Drum/Drain hoses

Worn drum bearings or tub seal

How to Identify: Deep rumbling or grinding during spin; noise increases with speed.

Part: Drum bearings/Seal

Worn drive belt or pulley

How to Identify: Squealing or thumping; access rear base shows visible wear.

Part: Drive belt/Pulley

Faulty suspension/shock absorbers

How to Identify: Excessive drum movement and loud banging during spin.

Part: Suspension rods/shocks

DIY Solutions

Redistribute and balance laundry

Easy 5-10 minutes
  1. Pause washer and open lid.
  2. Rearrange laundry for even weight distribution.
  3. Restart cycle.

Adjust leveling feet

Moderate 10-20 minutes
Tools Needed: wrench, spirit level
  1. Unplug washer.
  2. Use level and adjust feet to achieve even placement.
  3. Tighten lock nuts and recheck level.
⚠️ Safety First: Ensure unit unplugged before adjusting.

Remove foreign objects from drum

Easy 5-15 minutes
  1. Open door and inspect drum for small items.
  2. Remove coins/hard objects.
  3. Run brief rinse to check noise resolved.

Inspect/replace worn belt

Advanced 30-60 minutes
Tools Needed: screwdrivers, wrench, replacement belt
  1. Unplug and access back panel.
  2. Locate and remove old belt.
  3. Install new belt and reassemble.
⚠️ Safety First: Disconnect power.

Professional Repairs

Replace drum bearings and seal

Estimated Cost: $150 - $300

Replace suspension/shock absorbers

Estimated Cost: $100 - $250

When to Call a Professional

Persistent loud grinding or rumbling after DIY checks
Water leaking from machine
Error codes accompanying noise
Drum seems misaligned or locked

Preventive Maintenance

  • Level washer periodically: Unbalanced load noise and vibration
    Frequency: as needed
  • Inspect drum and pockets before wash: Foreign object noise
    Frequency: Every load
  • Clean filter/drain and inspect hoses: Clog noise and hose rattling
    Frequency: monthly

Frequently Asked Questions

Why is my Maytag Washing Machine making noise?
Common causes include an unbalanced load, leveling issues, or foreign objects in the drum.
How do I fix Maytag Washing Machine making noise myself?
You can redistribute laundry, adjust leveling feet, or remove foreign objects from the drum.
How much does it cost to fix making noise?
Professional repairs for noise issues cost between $100 and $300, depending on the problem.
When should I call a technician for making noise?
Call a technician if DIY fixes don't resolve the noise or if you suspect worn parts needing replacement.

References & Sources

Community Analytical Insights

Analysis based on real user discussions from appliance repair communities

Can I Fix This Myself?

65%
DIY Success Rate Difficulty: Either

Common Issues Reported by Users

  • Worn or damaged drive belt
  • Loose or damaged drum bearings
  • Foreign objects caught in the drum or pump

User Suggested Solutions

  1. Inspect and replace the drive belt. Disconnect the power, remove the back panel, and check the belt for wear or damage. Replace if necessary.

  2. Check and replace drum bearings. This involves removing the drum from the washer, which can be complex. Inspect for wear and replace if needed.

  3. Remove any foreign objects. Check the drum and the pump filter for any items that may be causing noise. Clear out any debris found.

Analysis based on 1 community discussions
View Sources

Data compiled from real discussions on r/appliancerepair and r/Appliances:

  1. Who to trust? Consumer Reports, or a very experienced repair...

Community Discussions

making awful noises

Repair guy recommended against LG and Samsung, suggesting to buy a new machine instead.

Pro needed View on Reddit →

Source: Reddit r/appliancerepair

User Comments (0)

Share your experience or solution below.

Be the first to comment!