Maytag Washing Machine: loud noises
What is this symptom?
Experiencing loud noises from your Maytag washing machine during wash or spin cycles? Common sounds include banging, grinding, and rattling, indicating possible issues like unbalanced loads or worn tub bearings. Identifying the source of these noises can help restore peace to your laundry routine.
Possible Causes
Unbalanced/overloaded or improperly loaded clothes
How to Identify: Loud banging/thumping during spin or wash that varies with load; noise reduces when load is redistributed evenly.
Part: Load distribution
Washer not level or unstable installation
How to Identify: Machine rocks or vibrates excessively; all feet are not contacting floor; audible vibration/humming.
Part: Leveling legs/floor stability
Foreign objects (coins, buttons) inside tub or pump
How to Identify: Rattling or clinking sounds during cycles; inspection reveals small objects in tub or pump filter/trap.
Part: Drum interior and drain pump/trap
Worn or damaged tub bearings
How to Identify: Loud grinding/rumbling, especially at high spin speeds; rough feel when spinning drum by hand.
Part: Tub bearing/seal assembly
Next step
Choose the next step for loud noises
Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.
Most relevant component to inspect
Drain Pump
Pumps waste water out of the appliance during the drain cycle.
- Typical part-only price
- $35 - $80
- DIY difficulty
- Easy
- Estimated time
- 15-30 mins
Where can I find the model number?
Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.
Verify the complete model and part number on the retailer's compatibility page before ordering.
Other components that may be involved
Check these only if your diagnosis points to them.
Drum Bearing Kit
Supports the spinning drum and ensures smooth, quiet rotation during cycles.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.
Preventive Maintenance
-
Check and level washer feet: Noise from imbalance and vibration
Frequency: monthly -
Inspect pockets and remove foreign objects: Rattling noises and potential internal damage
Frequency: before every wash -
Clean drain pump filter: Noise from debris and potential pump damage
Frequency: every 1-3 months
Frequently Asked Questions
Why is my Maytag Washing Machine making loud noises?
How do I fix Maytag Washing Machine loud noises myself?
How much does it cost to fix loud noises?
When should I call a technician for loud noises?
References & Sources
Community Analytical Insights
Analysis based on real user discussions from appliance repair communities
Can I Fix This Myself?
Common Issues Reported by Users
- Foreign object caught in the drum or pump
- Worn or damaged drum bearings
- Loose or damaged drive belt
User Suggested Solutions
-
Check for and remove any foreign objects: Unplug the washing machine, remove the drum access panel, and inspect for any items like coins or small clothing pieces caught in the drum or pump. Reassemble and test the machine.
-
Inspect and replace drum bearings: Unplug the machine, remove the outer casing, and check the bearings for wear. If they are damaged, replace them with new ones, ensuring proper alignment.
-
Examine and replace the drive belt: Unplug the machine, remove the back panel, and check the drive belt for wear or damage. If necessary, replace it with a new belt and reassemble the machine.
Analysis based on 1 community discussions
View
Sources
Data compiled from real discussions on r/appliancerepair and r/Appliances:
User Comments (0)
Share your experience or solution below.
Please login to post a comment.
Be the first to comment!