Maytag Washing Machine: loud noise

Possible Causes

Unbalanced or overloaded load

How to Identify: Noise occurs when heavy and light items are unevenly distributed or load is over capacity; often accompanied by shaking or vibration

Part: Load distribution/Drum

Washer not level

How to Identify: Washer rocks or vibrates excessively, loud noises persist even with balanced load

Part: Leveling feet

Foreign objects in drum or pump

How to Identify: Rattling, clunking or buzzing noises; small items like coins or keys visible or heard moving inside drum; noise during drain cycle suggests pump obstruction

Part: Drum/Drain pump filter

Shift actuator/clutch wear

How to Identify: Noise related to cycle transitions or steep increases in sound around spin engagement

Part: Shift actuator/Clutch assembly

DIY Solutions

Balance and redistribute laundry load

Easy 5-10 minutes

1. Stop the washer mid-cycle
2. Redistribute clothes evenly around the drum
3. Ensure not overloading (aim for ~75% capacity) and restart

⚠️ Safety First: Do not open lid/door mid-spin unless washer stops

Level the washer

Moderate 10-20 minutes

Tools Needed: Level tool, Wrench

1. Place a level on top of washer
2. Adjust each leveling foot until machine sits flat and stable
3. Tighten lock nuts on feet

Remove foreign objects from drum/pump

Moderate 15-30 minutes

Tools Needed: Flashlight, Screwdriver (if accessing pump filter)

1. Unplug washer
2. Inspect drum and pockets for objects
3. If front-load, open drain pump filter access and remove debris

⚠️ Safety First: Ensure power is disconnected before accessing internal parts

Next step

Choose the next step for loud noise

Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.

Based on diagnostic data

Most relevant component to inspect

Drain Pump

Pumps waste water out of the appliance during the drain cycle.

Typical part-only price

$35 - $80

DIY difficulty

Easy

Estimated time

15-30 mins

Optional: enter your model number

Apply

Where can I find the model number?

Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.

Find a part that fits my model

Verify the complete model and part number on the retailer's compatibility page before ordering.

Also check

RepairClinic

Other parts options

Check related components first; use model search as a fallback.

Model number required

Model-compatible Washing Machine parts

Enter the complete model number to browse compatible replacement parts. This is a model-based parts search, not a diagnosis that a specific component failed.

Find a part that fits my model

Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.

Optional routine care

Maintenance supplies

These products support cleaning or routine upkeep. They are separate from the possible repair components above and are not claimed to fix this error code or symptom.

Maintenance supply

Washing Machine Cleaner Tablets

Routine tub-cleaning supplies for residue and odor control. They do not repair a mechanical, drainage, or electronic fault.

View maintenance supply

Maintenance supply

Braided Washer Inlet Hoses

A maintenance replacement option for visibly worn external fill hoses. Verify thread size, length, and hot/cold connection requirements.

View maintenance supply

Maintenance supply

Washer Drain Hose Holder

Helps secure an external drain hose at the standpipe. It does not correct an internal pump or control fault.

View maintenance supply

Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. Recommendations are based on routine-care relevance, not commission rate.

Professional Repairs

Replace tub bearings

Estimated Cost: $100-$300+

Replace suspension components

Estimated Cost: $80-$200

Replace drive pulley or belt

Estimated Cost: $50-$150

Clutch or shift actuator repair

Estimated Cost: $100-$250

When to Call a Professional

Persistent grinding or loud noises after basic DIY checks

Suspected bearing failure or significant internal damage

Noise accompanied by leaks or error codes

Preventive Maintenance

• Level washer and adjust feet: Noise from imbalance/vibration
  Frequency: monthly
• Check pockets before washing: Foreign-object related noise
  Frequency: every load
• Inspect belts and components annually: Wear-related noise issues
  Frequency: annually

Frequently Asked Questions

Why is my Maytag Washing Machine loud noise?

Common causes include an unbalanced or overloaded load, an unlevel washer, or foreign objects in the drum.

How do I fix Maytag Washing Machine loud noise myself?

Stop the washer, redistribute the load, level the machine, or remove foreign objects from the drum or pump.

How much does it cost to fix loud noise?

Professional repair costs range from $50 to $300+, depending on the specific issue.

When should I call a technician for loud noise?

If DIY solutions don't resolve the issue or if the noise persists, it's time to consult a professional.

References & Sources

• Why is My Washing Machine Making Loud Noises? Official
• Knocking or Thumping - Noise - Product Help | Maytag Official

Common Issues Reported by Users

• Drain pump issues (1 mentions)
• Gearbox or motor problems (1 mentions)

User Suggested Solutions

1. Check and possibly replace the drain pump

2. Inspect gearbox and motor for wear or damage

Community Discussions

loud noise during wash mode

The Maytag Commercial is a decent machine, though it may be a bit noisy in spin and has a 'dying duck' sound during wash.

Pro needed View on Reddit →

Source: Reddit r/appliancerepair