Maytag Washing Machine: loud clicking noise
What is this symptom?
If your Maytag washing machine is making a loud clicking noise, especially during spin cycles, it's likely due to foreign objects caught in the drum or pump. This noise can be intermittent or continuous, resembling hard objects hitting metal. Addressing this issue promptly can prevent further damage and ensure smooth operation.
Important Tips for Maytag Models
- Maytag acknowledges normal lid-lock clicking at cycle start, but continuous clicking during spin likely indicates an issue.
Possible Causes
Foreign objects caught in the drum or pump
How to Identify: Clicking or rattling that changes when the load shifts; small items like coins or buttons found inside tub or pump filter
Part: Drain pump or drum area
Faulty lid lock or latch mechanism (especially front-load)
How to Identify: Clicking at start or end of cycle primarily when locking occurs
Part: Lid switch/lock
DIY Solutions
Remove foreign objects from drum and pump
- Unplug the washer and open the drum.
- Check the tub and pockets for coins, buttons or debris.
- Locate and open the drain pump filter (if applicable) and remove any trapped objects.
- Run a short empty cycle to confirm noise is gone.
Redistribute laundry and balance load
- Pause the cycle and open the lid/door.
- Redistribute clothes evenly around the drum.
- Ensure similarly weighted items are together.
- Restart cycle and observe if noise persists.
Inspect drive belt and pulley
- Unplug washer and access rear panel.
- Locate drive belt and inspect for wear or damage.
- Check drive pulley for wobble or cracks.
- Tighten or replace the belt/pulley if visibly defective.
Next step
Choose the next step for loud clicking noise
Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.
Most relevant component to inspect
Drain Pump
Pumps waste water out of the appliance during the drain cycle.
- Typical part-only price
- $35 - $80
- DIY difficulty
- Easy
- Estimated time
- 15-30 mins
Where can I find the model number?
Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.
Verify the complete model and part number on the retailer's compatibility page before ordering.
Other parts options
Check related components first; use model search as a fallback.
Door Lock Assembly
Secures the door shut during operation for safety and signals the control board to run.
Model-compatible Washing Machine parts
Enter the complete model number to browse compatible replacement parts. This is a model-based parts search, not a diagnosis that a specific component failed.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.
Optional routine care
Maintenance supplies
These products support cleaning or routine upkeep. They are separate from the possible repair components above and are not claimed to fix this error code or symptom.
Washing Machine Cleaner Tablets
Routine tub-cleaning supplies for residue and odor control. They do not repair a mechanical, drainage, or electronic fault.
Braided Washer Inlet Hoses
A maintenance replacement option for visibly worn external fill hoses. Verify thread size, length, and hot/cold connection requirements.
Washer Drain Hose Holder
Helps secure an external drain hose at the standpipe. It does not correct an internal pump or control fault.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. Recommendations are based on routine-care relevance, not commission rate.
Professional Repairs
Replace tub bearings
Replace drive pulley and belt
Lid lock/latch replacement
When to Call a Professional
Preventive Maintenance
-
Check pockets before washing: Foreign objects causing clicking noise
Frequency: Every load -
Level washer: Unbalanced loads and related noise
Frequency: Monthly
Frequently Asked Questions
Why is my Maytag Washing Machine loud clicking noise?
How do I fix Maytag Washing Machine loud clicking noise myself?
How much does it cost to fix loud clicking noise?
When should I call a technician for loud clicking noise?
References & Sources
Community Analytical Insights
Guidance from available sources; statistical claims are shown only for samples of at least 10 discussions
Common Issues Reported by Users
- Foreign object caught in the drum or pump
- Worn or damaged drive belt
- Faulty lid switch or actuator
User Suggested Solutions
-
Inspect the drum for foreign objects (coins, buttons, etc.). Remove any debris found. Check the drain pump for blockages as well.
-
Check the drive belt for signs of wear or damage. If worn, replace it by loosening the motor mount and removing the old belt before installing a new one.
-
Test the lid switch for functionality. If faulty, replace it by removing the control panel and disconnecting the old switch.
Limited-source guidance; percentages and success-rate claims are not shown
View
Sources
Data compiled from real discussions on r/appliancerepair and r/Appliances:
User Comments (0)
Share your experience or solution below.
Please login to post a comment.
Be the first to comment!