Maytag Washing Machine: leaking water

Possible Causes

Loose, damaged, or improperly connected inlet or drain hoses

How to Identify: Water pooling near back of washer; visible drips from hose connections; cracks or bulges in hoses.

Part: Inlet hoses, drain hose, hose clamps

Damaged tub seal or bearing

How to Identify: Leak from base during rotation; noise during spin; water seepage near center of washer base.

Part: Tub seal and bearings

Incorrect detergent use causing oversudsing and overflow

How to Identify: Sudsy overflow around door or dispenser during cycle; especially with non-HE detergent in HE machines.

Part: Detergent use/process

Crack in tub or drum

How to Identify: Persistent leak regardless of hose/connection condition; visible cracks on inspection.

Part: Inner tub/drum

DIY Solutions

Check and Tighten Hoses

Easy 10-20 minutes

Tools Needed: adjustable wrench, towel

1. Turn off water supply and unplug washer.
2. Inspect inlet and drain hoses for cracks or looseness.
3. Tighten hose clamps and connections at both washer and wall ends.
4. Replace hoses if damaged.

⚠️ Safety First: Always turn off water supply and unplug before working on hoses.

Clean and Inspect Door Gasket (Front-loaders)

Easy 10-30 minutes

Tools Needed: cloth, mild cleaner

1. Open washer door and inspect gasket for debris or damage.
2. Clean gasket folds thoroughly to remove soap residue.
3. If gasket is torn, consider replacement part installation.

⚠️ Safety First: Unplug machine before working inside door area.

Ensure Correct Detergent and Amount

Easy 5 minutes

1. Check whether washer requires HE detergent.
2. Use only recommended amount to avoid oversudsing.
3. Run a rinse/spin cycle to clear existing suds.

Next step

Choose the next step for leaking water

Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.

Based on diagnostic data

Most relevant component to inspect

Drain Hose

Carries waste water from the drain pump to your home's standpipe or sink drain.

Typical part-only price

$15 - $30

DIY difficulty

Easy

Estimated time

15-30 mins

Optional: enter your model number

Apply

Where can I find the model number?

Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.

Find a part that fits my model

Verify the complete model and part number on the retailer's compatibility page before ordering.

Other parts options

Check related components first; use model search as a fallback.

Possible related component

Washer Tub Assembly

Forms the model-specific inner basket and outer water-containing tub assembly.

$150 - $600 · Hard · 120-240 mins

Check fit & price

Model number required

Model-compatible Washing Machine parts

Enter the complete model number to browse compatible replacement parts. This is a model-based parts search, not a diagnosis that a specific component failed.

Find a part that fits my model

Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.

Optional routine care

Maintenance supplies

These products support cleaning or routine upkeep. They are separate from the possible repair components above and are not claimed to fix this error code or symptom.

Maintenance supply

Washing Machine Cleaner Tablets

Routine tub-cleaning supplies for residue and odor control. They do not repair a mechanical, drainage, or electronic fault.

View maintenance supply

Maintenance supply

Braided Washer Inlet Hoses

A maintenance replacement option for visibly worn external fill hoses. Verify thread size, length, and hot/cold connection requirements.

View maintenance supply

Maintenance supply

Washer Drain Hose Holder

Helps secure an external drain hose at the standpipe. It does not correct an internal pump or control fault.

View maintenance supply

Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. Recommendations are based on routine-care relevance, not commission rate.

Professional Repairs

Replace Drain Pump

Estimated Cost: $50 - $200

Replace Tub Seal/Bearing Kit

Estimated Cost: $100 - $300

Replace Water Inlet Valve

Estimated Cost: $40 - $120

Replace Door Gasket

Estimated Cost: $30 - $150

When to Call a Professional

Leak persists after tightening hoses and checking seals

Water continues to leak even when washer is off (possible inlet valve/tub crack)

Signs of internal component damage (pump, tub seal, bearings)

Preventive Maintenance

• Inspect hoses for wear: Hose-related leaks and bursts
  Frequency: annually
• Clean door gasket: Seal deterioration and mold build‑up
  Frequency: monthly
• Use correct detergent: Oversudsing and overflow issues
  Frequency: every wash

Frequently Asked Questions

Why is my Maytag Washing Machine leaking water?

Common causes include loose or damaged hoses, a faulty tub seal, or incorrect detergent use.

How do I fix Maytag Washing Machine leaking water myself?

Check and tighten hoses, clean the door gasket, and ensure you're using the correct detergent.

How much does it cost to fix leaking water?

Professional repairs typically cost between $30 and $300, depending on the issue.

When should I call a technician for leaking water?

If the leak persists after DIY fixes or if you suspect a complex issue, call a technician.

References & Sources

• Maytag How to Fix a Leaking Washing Machine Official
• Maytag Front Load Washer Leaking from Underneath Official

Common Issues Reported by Users

• Faulty water inlet valve (1 mentions)

User Suggested Solutions

1. Replaced the faulty water inlet valve

Community Discussions

slowly leaking water after the cycle had finished

Replaced the faulty water inlet valve

DIY View on Reddit →

Source: Reddit r/appliancerepair