Maytag Washing Machine: error code

Professional Repair Guide

What is this symptom?

Are you seeing an error code on your Maytag washing machine's digital panel? This indicates a specific fault that may halt operation. Common codes like F9 E1, F8 E1, and Sud can point to issues including drain problems, low water fill, or excessive suds. Understanding these codes is essential for timely diagnosis and repair.

Urgency: Medium

Important Tips for Maytag Models

  • Maytag shares control platforms with Whirlpool on many models, so Whirlpool-style error code behaviors often apply. (ARS Repairs Inc.

Possible Causes

Drain system issue (e.g., F9 E1 or drn code)

How to Identify: Codes like F9 E1, drn, or long drain times; water remains in tub or washer pauses mid-cycle. (ARS Repairs Inc.

Part: Drain hose/pump

Low water fill/flow issue (e.g., F8 E1 / LO FL)

How to Identify: Codes indicating low flow or long fill times; water fills slowly or not at all. (ARS Repairs Inc.

Part: Water inlet hoses/valves

Excessive suds detected (Sud or Sd)

How to Identify: Sud or Sd on display; poor spin/drain performance. (ARS Repairs Inc.

Part: Detergent usage/detergent system

Door/Lid lock fault (e.g., F5 E2, dL, LdL)

How to Identify: Codes referencing door/lid lock; machine won’t start or pauses mid-cycle. (ARS Repairs Inc.

Part: Door/lid latch or lock assembly

Control lock activated (LOC or LC)

How to Identify: LOC/LC on display; buttons unresponsive. (Product Help | Maytag

Part: Control panel feature

Motor/motor sensor related error (e.g., F7 E1)

How to Identify: Code indicates motor speed or sensor fault; washer may not spin properly.

Part: Motor / speed sensor

DIY Solutions

Clear drain hose and check pump filter

Moderate 15–30 minutes
Tools Needed: screwdriver, bucket/towels
  1. Turn off power and water to the washer.
  2. Access the drain hose at the back and inspect for kinks or clogs.
  3. Remove obstructions and ensure hose is properly positioned.
  4. Check the pump filter (if accessible) for debris and clean.
⚠️ Safety First: Disconnect power before servicing.

Straighten inlet hoses and verify water supply

Easy 10–15 minutes
Tools Needed: none
  1. Ensure both hot and cold water valves are fully open.
  2. Straighten any kinks in inlet hoses.
  3. Check screens on inlet valve for blockage and clean if needed.
⚠️ Safety First: Turn off water before detaching hoses.

Run rinse/spin with no detergent to clear suds

Easy 5–10 minutes
Tools Needed: none
  1. Remove excess suds if visible.
  2. Select Rinse/Spin cycle with no detergent.
  3. Run cycle to flush suds.
⚠️ Safety First: Use only HE detergent per model requirements.

Deactivate Control Lock

Easy 1–2 minutes
Tools Needed: none
  1. Locate Control Lock button on control panel.
  2. Press and hold for the required number of seconds per manual to deactivate.

Professional Repairs

Replace door lock/latch assembly

Estimated Cost: $50–$150

Service or replace drain pump

Estimated Cost: $80–$200

Motor or control board diagnosis/repair

Estimated Cost: $150–$400+

When to Call a Professional

Error code persists after basic DIY checks (hose blockages, inlet adjustments)
Door lock or motor-related error codes continue after resets
Water leakage or unusual noises accompany error codes

Preventive Maintenance

  • Clean inlet hose screens: Low water flow error codes
    Frequency: every 6 months
  • Use correct HE detergent and measure properly: Excessive suds (Sud/Sd errors)
    Frequency: each wash
  • Check and clear drain hose blockages: Drain-related error codes
    Frequency: every 3–6 months

Frequently Asked Questions

Why is my Maytag Washing Machine error code?
Common causes include drain issues (F9 E1), low water fill (F8 E1), and excessive suds (Sud).
How do I fix Maytag Washing Machine error code myself?
You can clear the drain hose, straighten inlet hoses, run a rinse cycle, or deactivate the control lock.
How much does it cost to fix error code?
Professional repair costs range from $50 to over $400 depending on the issue.
When should I call a technician for error code?
Call a technician if DIY fixes don’t resolve the issue, especially for motor or control board problems.

References & Sources

Community Analytical Insights

Analysis based on real user discussions from appliance repair communities

Can I Fix This Myself?

100%
DIY Success Rate Difficulty: DIY

Common Issues Reported by Users

  • Steamer electronic board or NTC resistance issue (1 mentions)
  • Basket speed sensor fault or shift actuator failure (1 mentions)

User Suggested Solutions

  1. Check the steamer electronic board and NTC resistance; replace parts if necessary.

    Success rate: 33.0%

  2. Basket speed sensor fault or shift actuator failure.

    Success rate: 33.0%
Analysis based on 3 community discussions
View Sources

Data compiled from real discussions on r/appliancerepair and r/Appliances:

  1. Top loader maytag washer mvw18awww0 error code f_62
  2. Maytag washer diagnostic error
  3. Maytag Neptune Washing Machine dS Error

Community Discussions

error code f_62

Check the steamer electronic board and NTC resistance; replace parts if necessary.

DIY View on Reddit →

error code

Basket speed sensor fault or shift actuator failure

Pro needed View on Reddit →

Source: Reddit r/appliancerepair

User Comments (0)

Share your experience or solution below.

Be the first to comment!