Maytag Washing Machine: clogged drainage filter
What is this symptom?
Is your Maytag washing machine struggling to drain water? If water remains in the drum after spins, or if you are encountering slow drainage and error codes, the culprit could be a clogged drainage filter. This common issue often arises during or after wash cycles, preventing efficient water removal and leading to potential damage if not addressed promptly.
Important Tips for Maytag Models
- Maytag official guidance highlights drain pump filter may be clogged with dirt, lint, or other items and should be cleaned occasionally
- Some top-load models after 2001 may not have user-accessible filters; consult manual for filter location
Possible Causes
Drain pump filter clogged with lint, debris, small objects
How to Identify: Visible debris and lint when accessing filter; water not draining and slow drain cycles
Part: Drain pump filter
Clogged or kinked drain hose
How to Identify: Drain hose twisted, bent or blocked; water not flowing freely out of washer
Part: Drain hose
Debris in pump or pump inlet
How to Identify: Water still not draining after filter cleaning; noise or blockage felt at pump inlet
Part: Drain pump
Defective lid switch or electrical component
How to Identify: No drain initiation when lid closed; machine behaves as if lid open
Part: Lid switch/pump circuit
DIY Solutions
Clean the Drain Pump Filter
- Unplug washer and place container under access cover
- Open filter access (front/bottom), slowly unscrew filter cover
- Remove debris and lint from filter and housing
- Replace filter securely and run a rinse cycle to test drainage
Inspect and Straighten Drain Hose
- Unplug washer and locate drain hose behind machine
- Check for kinks, bends or visible obstructions
- Straighten hose path and ensure proper height and positioning
- Reconnect and test drain cycle
Next step
Choose the next step for clogged drainage filter
Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.
Most relevant component to inspect
Drain Pump
Pumps waste water out of the appliance during the drain cycle.
- Typical part-only price
- $35 - $80
- DIY difficulty
- Easy
- Estimated time
- 15-30 mins
Where can I find the model number?
Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.
Verify the complete model and part number on the retailer's compatibility page before ordering.
Other parts options
Check related components first; use model search as a fallback.
Drain Hose
Carries waste water from the drain pump to your home's standpipe or sink drain.
Door or Lid Switch
Detects whether the appliance door or lid is safely closed before operation.
Model-compatible Washing Machine parts
Enter the complete model number to browse compatible replacement parts. This is a model-based parts search, not a diagnosis that a specific component failed.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.
Optional routine care
Maintenance supplies
These products support cleaning or routine upkeep. They are separate from the possible repair components above and are not claimed to fix this error code or symptom.
Washing Machine Cleaner Tablets
Routine tub-cleaning supplies for residue and odor control. They do not repair a mechanical, drainage, or electronic fault.
Braided Washer Inlet Hoses
A maintenance replacement option for visibly worn external fill hoses. Verify thread size, length, and hot/cold connection requirements.
Washer Drain Hose Holder
Helps secure an external drain hose at the standpipe. It does not correct an internal pump or control fault.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. Recommendations are based on routine-care relevance, not commission rate.
Professional Repairs
Drain Pump or Hose Deep Cleaning/Replacement
Electrical Component Diagnosis and Replacement
When to Call a Professional
Preventive Maintenance
-
Clean drain filter: Clogging and drainage slowdowns
Frequency: Monthly or bi-monthly -
Check drain hose positioning: Kinks or improper drainage path issues
Frequency: Quarterly -
Use laundry bags for small items: Objects entering drain system
Frequency: Each load
Frequently Asked Questions
Why is my Maytag Washing Machine clogged drainage filter?
How do I fix Maytag Washing Machine clogged drainage filter myself?
How much does it cost to fix clogged drainage filter?
When should I call a technician for clogged drainage filter?
References & Sources
Community Analytical Insights
Guidance from available sources; statistical claims are shown only for samples of at least 10 discussions
Common Issues Reported by Users
- Debris buildup in the drainage filter
- Blocked drain hose
- Faulty pump or pump impeller
User Suggested Solutions
-
1. Unplug the washing machine. 2. Locate the drainage filter, usually at the bottom front of the machine. 3. Open the filter cover and remove any visible debris. 4. Place a towel or shallow pan underneath to catch any water. 5. Remove the filter and clean it under running water. 6. Reinsert the filter and close the cover. 7. Plug the machine back in and run a test cycle.
-
1. Unplug the washing machine. 2. Check the drain hose for kinks or blockages. 3. Remove the hose from the back of the machine and inspect for clogs. 4. Clean the hose thoroughly and reattach it. 5. Test the machine by running a cycle.
-
1. Unplug the washing machine. 2. Access the pump by removing the back panel (if applicable). 3. Inspect the pump and impeller for any signs of damage or blockage. 4. If damaged, replace the pump. 5. Reassemble the machine and run a test cycle.
Limited-source guidance; percentages and success-rate claims are not shown
View
Sources
Data compiled from real discussions on r/appliancerepair and r/Appliances:
User Comments (0)
Share your experience or solution below.
Please login to post a comment.
Be the first to comment!