Maytag Dryer: banging noise

Professional Repair Guide

What is this symptom?

Are you hearing a loud banging noise from your Maytag dryer during operation? This rhythmic thumping sound, particularly noticeable as the drum rotates, is often indicative of common issues such as worn drum support rollers or an unbalanced load. Addressing these problems promptly can help restore your dryer's normal operation and prevent further damage.

Urgency: Medium

Important Tips for Maytag Models

  • Maytag notes that flattened drum support rollers can cause thumping which may decrease once rollers regain shape during initial run; persistent noise often means rollers or other parts require replacement.

Possible Causes

Worn or damaged drum support rollers

How to Identify: Thumping or banging that occurs with each drum revolution and persists regardless of load distribution; may also feel irregular drum movement.

Part: Drum support rollers

Unbalanced or overloaded load

How to Identify: Noise occurs only with certain loads (e.g., bulky items and resolves when load is redistributed or lighter.

Part: Load distribution

DIY Solutions

Check and remove foreign objects

Easy 5-10 minutes
  1. Turn off and unplug the dryer.
  2. Open the drum and inspect for coins, metal objects, or debris; remove objects found.
  3. Check along drum seams and lint trap area for lodged items and clear them out.
  4. Run a short empty cycle to see if noise persists.
⚠️ Safety First: Always disconnect power before reaching into dryer interior.

Redistribute or reduce load size

Easy 2-5 minutes
  1. Stop the dryer and open the door.
  2. Remove or redistribute large or bunched items (e.g., bedspreads, towels).
  3. Reload smaller amounts and ensure even distribution before resuming cycle.

Inspect and replace drum support rollers

Moderate 60-90 minutes
Tools Needed: Screwdriver, Nut driver, Replacement rollers
  1. Unplug dryer and remove access panels.
  2. Locate drum support rollers and spin them; if they don’t spin freely or have flat spots, replace.
  3. Reassemble panels and test dryer for noise.
  4. Replace all rollers as a set for even wear.
⚠️ Safety First: Disconnect power before servicing.

Professional Repairs

Blower wheel adjustment or replacement

Estimated Cost: $80 - $200

Drive belt and idler pulley replacement

Estimated Cost: $50 - $150

When to Call a Professional

Banging persists after checking for foreign objects and load balancing
Internal components like rollers, blower wheel, or belt show significant wear or damage
You are not comfortable disassembling internal dryer components

Preventive Maintenance

  • Clean lint trap and check drum interior: Foreign object related noises and airflow issues
    Frequency: Before each use
  • Level dryer on installation: Unbalanced operation leading to banging and vibration
    Frequency: Once at setup and after relocation

Frequently Asked Questions

Why is my Maytag Dryer banging noise?
Common causes include worn drum support rollers and an unbalanced or overloaded load.
How do I fix Maytag Dryer banging noise myself?
Check for foreign objects, redistribute the load, or inspect and replace drum support rollers.
How much does it cost to fix banging noise?
Professional repairs like blower wheel adjustments or drive belt replacements can cost between $50 and $200.
When should I call a technician for banging noise?
If DIY solutions don't resolve the issue or if the problem persists, it's time to seek professional help.

References & Sources

Community Analytical Insights

Analysis based on real user discussions from appliance repair communities

Can I Fix This Myself?

75%
DIY Success Rate Difficulty: Either

Common Issues Reported by Users

  • Worn or damaged drum support rollers
  • Loose or damaged drum belt
  • Faulty idler pulley
  • Foreign objects in the drum or blower housing
  • Improperly installed or damaged drum

User Suggested Solutions

  1. Inspect and replace worn or damaged drum support rollers. Open the dryer door, remove the drum, and check the rollers for wear. Replace if necessary.

  2. Check the drum belt for wear or damage. If loose or frayed, replace the belt. This involves removing the front panel and drum.

  3. Examine the idler pulley for damage or wear. If faulty, replace the idler pulley to ensure proper tension on the drum belt.

  4. Check for foreign objects inside the drum or blower housing. Remove any debris that may be causing the noise.

  5. Ensure the drum is properly installed and check for any damage. Realign or replace as necessary.

Analysis based on 1 community discussions
View Sources

Data compiled from real discussions on r/appliancerepair and r/Appliances:

  1. Maytag dryer making banging/whiping noise

Community Discussions

banging/whipping noise

Check the belt and idler pulley; may need to replace the belt.

DIY View on Reddit →

Source: Reddit r/appliancerepair

User Comments (0)

Share your experience or solution below.

Be the first to comment!