Frigidaire Oven: screw hole rusted out

Professional Repair Guide

What is this symptom?

If you're experiencing rusted screw holes in your Frigidaire oven, it may indicate moisture exposure leading to corrosion of the metal panels. This issue can prevent screws from securing components correctly, causing panels to loosen or fall off. Addressing rust promptly is essential to maintain your oven's functionality and safety.

Urgency: Medium

Possible Causes

Moistureâ€‘induced corrosion of oven sheet metal

How to Identify: Visible rust around the screw hole, screws that no longer hold, and potentially loose panels such as the back panel.

Part: Oven liner/panel screw holes

Preventive Maintenance

Regularly inspect and clean interior metal surfaces: Rust buildup at screw points and panel edges
Frequency: every 3â€“6 months
Dry interior after steamâ€‘producing cooking tasks: Moisture accumulation that leads to corrosion
Frequency: after each use

Frequently Asked Questions

Why is my Frigidaire Oven screw hole rusted out?

The rusted screw holes are typically caused by moisture-induced corrosion of the oven's sheet metal.

How do I fix Frigidaire Oven screw hole rusted out myself?

No DIY solutions are recommended for this issue, as it requires professional assessment.

How much does it cost to fix screw hole rusted out?

Professional repair costs vary; consult a technician for an accurate estimate.

When should I call a technician for screw hole rusted out?

You should call a technician if the rust is severe, affecting the safety and functionality of your oven.

References & Sources

Frigidaire Range/Stove/Oven Screw Parts Repair-Blog

Community Analytical Insights

Analysis based on real user discussions from appliance repair communities

Can I Fix This Myself?

70%

DIY Success Rate Difficulty: Either

Common Issues Reported by Users

Exposure to moisture leading to rust formation around screw holes
Poor quality materials used in the construction of the oven, leading to corrosion
Inadequate sealing or insulation around the oven, allowing water ingress

User Suggested Solutions

Drill a new hole nearby and secure the fan cover with a stainless steel screw. Ensure the area is clean and dry before proceeding.
Use a rust-inhibiting primer and sealant on the existing screw hole to prevent further rusting. Reinsert the screw or use a larger screw if necessary.
Replace the affected panel or cover if the rust damage is extensive. This may require disassembly of the oven for access.

Analysis based on 1 community discussions
View Sources

Data compiled from real discussions on r/appliancerepair and r/Appliances:

Oven screw hole rusted out

Community Discussions

screw hole rusted out

Drilled a new hole nearby and used a stainless sheet metal screw to secure the fan cover.