Frigidaire Dishwasher: making noise
What is this symptom?
Are you hearing unusual noises from your Frigidaire dishwasher? Grinding, humming, rattling, or buzzing sounds during filling, washing, or draining cycles can indicate underlying issues. Common causes include debris in the filter, a failing circulation pump, or obstructed spray arms. Address these problems promptly to avoid further damage and maintain your dishwasher's performance.
Important Tips for Frigidaire Models
- Frigidaire official noise guide notes specific noises like hissing, humming, clunking can be normal or indicate specific issues such as spray arm contact or ball valve noise
- Wash arm bearing rings and spray arm seals can wear and cause noise; these are noted parts in Frigidaire-specific repair guides
Possible Causes
Debris caught in filter, pump, or chopper area
How to Identify: Grinding or rattling noise during wash or drain cycles; inspect bottom of tub and pump area for foreign objects like glass, bones, pits
Part: Filter, drain pump, chopper blade area
Worn or failing circulation pump or pump bearings
How to Identify: Humming or loud drone during wash cycle; continuous noise even without water flow; bearings wear produces noise
Part: Circulation pump motor and bearings
Damaged wash impeller
How to Identify: Scraping noise during water circulation; inspect impeller for broken or warped blades
Part: Wash impeller
Obstructed or poorly loaded spray arms
How to Identify: Clunking or thumping when spray arms hit dishes or racks; noise changes with water spraying
Part: Spray arms
Faulty water inlet valve
How to Identify: Buzzing or vibrating sounds during fill cycle; noise not typical water fill sound
Part: Water inlet valve
Leveling or mounting issues
How to Identify: Vibration, rattling that stops when load changes; unit not stable or touching cabinet
Part: Dishwasher frame and leveling legs
DIY Solutions
Remove debris from filter and pump area
- Turn off power to dishwasher at breaker
- Remove bottom rack and filter assembly
- Inspect sump and pump area for hard debris (glass, bones, pits)
- Use gloves to remove any objects and reassemble filter
Check and clean spray arms
- Turn off power to unit
- Remove top and bottom racks as needed
- Spin spray arms by hand to ensure free movement
- Clear any blockages and ensure nothing in rack obstructs arms
Adjust dishwasher leveling
- Turn off dishwasher
- Check level with a level tool
- Adjust leveling feet until dishwasher is stable and not contacting cabinets
- Test run to confirm noise reduction
Next step
Choose the next step for making noise
Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.
Most relevant component to inspect
Drain Pump
Pumps waste water out of the appliance during the drain cycle.
- Typical part-only price
- $35 - $80
- DIY difficulty
- Easy
- Estimated time
- 15-30 mins
Where can I find the model number?
Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.
Verify the complete model and part number on the retailer's compatibility page before ordering.
Other parts options
Check related components first; use model search as a fallback.
Dishwasher Circulation Pump
Circulates pressurized water through the dishwasher spray arms during the wash cycle.
Water Inlet Valve
Controls the flow of hot and cold water into the appliance.
Appliance Leveling Leg
Supports and levels the appliance to reduce rocking, vibration, and door-alignment problems.
Model-compatible Dishwasher parts
Enter the complete model number to browse compatible replacement parts. This is a model-based parts search, not a diagnosis that a specific component failed.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.
Optional routine care
Maintenance supplies
These products support cleaning or routine upkeep. They are separate from the possible repair components above and are not claimed to fix this error code or symptom.
Dishwasher Cleaner and Descaler
Supports routine removal of mineral scale, grease, and odor. It is maintenance, not a repair for a failed pump, valve, or control.
Braided Dishwasher Inlet Hose
For replacement of an externally damaged supply hose. Verify connection size, length, and appliance installation requirements before ordering.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. Recommendations are based on routine-care relevance, not commission rate.
Professional Repairs
Replace circulation pump or bearings
Replace water inlet valve
Replace wash impeller or pump components
When to Call a Professional
Preventive Maintenance
-
Clean filters and sump regularly: Debris buildup causing pump noise
Frequency: monthly -
Check spray arms and load properly: Spray arm obstruction and associated noise
Frequency: every use
Frequently Asked Questions
Why is my Frigidaire Dishwasher making noise?
How do I fix Frigidaire Dishwasher making noise myself?
How much does it cost to fix making noise?
When should I call a technician for making noise?
References & Sources
- Frigidaire Dishwasher - Noise Guide Official
Community Analytical Insights
Guidance from available sources; statistical claims are shown only for samples of at least 10 discussions
Common Issues Reported by Users
- Worn or damaged motor bearings
- Loose or damaged spray arm
- Foreign objects in the impeller or filter
User Suggested Solutions
-
Inspect and replace motor bearings. Disconnect power, remove the dishwasher's lower spray arm, and access the motor to check for wear. Replace with compatible bearings if needed.
-
Tighten or replace the spray arm. Check for any cracks or looseness in the spray arm. If damaged, replace it with a new one.
-
Clear foreign objects from the impeller or filter. Remove the filter and inspect for debris. Clean thoroughly and reassemble.
Limited-source guidance; percentages and success-rate claims are not shown
View
Sources
Data compiled from real discussions on r/appliancerepair and r/Appliances:
User Comments (0)
Share your experience or solution below.
Please login to post a comment.
Be the first to comment!