Electrolux Washing Machine: shaking during spin cycle

Professional Repair Guide

What is this symptom?

Is your Electrolux washing machine shaking excessively during the spin cycle? This common issue can range from mild vibrations to violent movements. Often caused by an unbalanced load, this problem can disrupt your laundry routine and potentially damage your appliance if not addressed promptly.

Urgency: Medium

Important Tips for Electrolux Models

  • Electrolux models may use specific shock absorbers, suspension springs, balance rings that dampen vibration

Possible Causes

Unbalanced laundry load

How to Identify: Occurs when heavy or bulky items (e.g., blankets, rugs cluster on one side of the drum; shaking reduces after redistributing clothes.

Part: Drum/Load distribution

DIY Solutions

Redistribute laundry load

Easy 2–5 minutes
  1. Stop the machine mid-cycle
  2. Open door and redistribute clothes evenly around the drum
  3. Close door and resume spin cycle
⚠️ Safety First: Stop machine before opening door

Level the washing machine

Moderate 10–20 minutes
Tools Needed: spirit level, wrench
  1. Place a spirit level on top of washer
  2. Adjust each leveling foot until machine is balanced
  3. Tighten lock nuts on feet once level
⚠️ Safety First: Disconnect power before moving machine

Remove transit bolts (if newly installed)

Moderate 10–30 minutes
Tools Needed: wrench/sockets
  1. Locate transit bolts on rear of machine
  2. Unscrew and remove all transit bolts
  3. Store bolts safely for future transport
  4. Check machine is level and run a test spin
⚠️ Safety First: Refer to manual for bolt locations

Professional Repairs

Replace shock absorbers

Estimated Cost: $50 - $150

Replace suspension springs

Estimated Cost: $40 - $120

Replace balance ring or bearings

Estimated Cost: $150 - $400+

When to Call a Professional

Shaking persists after balancing load and leveling
Grinding or unusual noises accompany shaking
Visible internal component damage (springs, bearings)

Preventive Maintenance

  • Check machine level and feet: Load imbalance and vibration issues
    Frequency: monthly
  • Inspect and clean drum and filter: Objects causing imbalance or obstruction
    Frequency: quarterly

Frequently Asked Questions

Why is my Electrolux Washing Machine shaking during spin cycle?
Your washing machine may be shaking due to an unbalanced laundry load, which is a common issue.
How do I fix Electrolux Washing Machine shaking during spin cycle myself?
You can redistribute the laundry, level the machine, or remove transit bolts if newly installed.
How much does it cost to fix shaking during spin cycle?
Professional repairs can range from $50 to $400+, depending on the necessary parts.
When should I call a technician for shaking during spin cycle?
Call a technician if the shaking persists after DIY fixes or if you suspect major component failure.

References & Sources

Community Analytical Insights

Analysis based on real user discussions from appliance repair communities

Can I Fix This Myself?

75%
DIY Success Rate Difficulty: Either

Common Issues Reported by Users

  • Unbalanced load due to uneven distribution of laundry
  • Worn or damaged suspension springs or shock absorbers
  • Improper installation or leveling of the washing machine

User Suggested Solutions

  1. Redistribute the laundry evenly in the drum. If necessary, remove some items and run a smaller load.

  2. Inspect and replace worn or damaged suspension springs or shock absorbers. This may involve removing the outer casing of the washer.

  3. Check and adjust the leveling feet of the washing machine to ensure it is stable and level on the floor.

Analysis based on 1 community discussions
View Sources

Data compiled from real discussions on r/appliancerepair and r/Appliances:

  1. Electrolux Washing machine shaking violently

User Comments (0)

Share your experience or solution below.

Be the first to comment!