Electrolux Washing Machine Error E11
⚡ Quick Answer: The E11 error code on Electrolux washing machines indicates a water filling issue, where the washer is taking too long to fill with water during the w... ✅ DIY Fixable
What Does Error E11 Mean?
The E11 error code on Electrolux washing machines indicates a water filling issue, where the washer is taking too long to fill with water during the wash cycle. This problem can arise from insufficient water supply, closed water taps, low water pressure, or kinks in the inlet hose. If the issue persists, it may involve a faulty water inlet valve or pressure sensor that requires professional attention.
Common Symptoms:
- Washer displays E11 during early part of wash cycle
- The machine does not fill with water or fills very slowly
- Unit may lock temporarily when error displayed
Possible Causes
- Water supply not entering washer (hot/cold lines not supplying water) (high)
- Closed or partially closed water tap / low water pressure (high)
- Kinked or blocked inlet hose or inlet filters restricting water flow (medium)
- Faulty water inlet valve or pressure sensor affecting water intake (medium)
How to Fix Error E11
DIY Fix Basic user checks for E11
- Ensure the washer’s water supply taps are fully open
- Verify that water pressure at the supply is adequate
- Inspect the inlet hoses for kinks, twists, or visible blockages
- Clean the small filter screens at the water inlet hose connections
Technician Only Advanced inspection and part-level fixes
- Check and test water inlet valve operation and replace if defective
- Test the water pressure/level sensor and replace if malfunctioning
- Inspect and service internal inlet hose filters
- Verify installation was done correctly and hoses are correctly oriented
Parts needed: water inlet valve, pressure/water level sensor, inlet hose filters
- If basic user checks don’t clear the error
- If the error recurs after servicing inlet hoses and filters
- If internal components (valve or sensor) are suspected faulty
Next step
Choose the next step for E11
Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.
Most relevant component to inspect
Water Inlet Valve
Controls the flow of hot and cold water into the appliance.
- Typical part-only price
- $25 - $60
- DIY difficulty
- Easy
- Estimated time
- 15-30 mins
Where can I find the model number?
Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.
Verify the complete model and part number on the retailer's compatibility page before ordering.
Other parts options
Check related components first; use model search as a fallback.
Pressure Switch
Detects the water level inside the tub and signals when to start or stop filling.
Model-compatible Washing Machine parts
Enter the complete model number to browse compatible replacement parts. This is a model-based parts search, not a diagnosis that a specific component failed.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.
Optional routine care
Maintenance supplies
These products support cleaning or routine upkeep. They are separate from the possible repair components above and are not claimed to fix this error code or symptom.
Washing Machine Cleaner Tablets
Routine tub-cleaning supplies for residue and odor control. They do not repair a mechanical, drainage, or electronic fault.
Braided Washer Inlet Hoses
A maintenance replacement option for visibly worn external fill hoses. Verify thread size, length, and hot/cold connection requirements.
Washer Drain Hose Holder
Helps secure an external drain hose at the standpipe. It does not correct an internal pump or control fault.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. Recommendations are based on routine-care relevance, not commission rate.
Technical Specifications
| wattage | 20W |
|---|---|
| component | Water Inlet Valve |
| resistance | 10-20 ohms |
| part_number | Electrolux 134763500 |
| voltage_rating | 120V AC |
Common Questions
What does E11 error mean on electrolux washing machine?
E11 error indicates a water filling issue, often due to insufficient supply or inlet problems.
Can I fix electrolux washing machine E11 error myself?
Yes, check the water supply taps, ensure adequate pressure, and inspect hoses for blockages.
How much does it cost to fix E11 error?
Repair costs range from $50 to $250, depending on parts and labor.
When should I call a technician for E11?
Call a technician if basic checks don't resolve the error or if internal components are suspected to be faulty.
Sources & References
Data last verified: 2026-07-25
User Comments (0)
Share your experience or solution below.
Please login to post a comment.
Be the first to comment!