Electrolux Washing Machine Error E24

⚡ Quick Answer: The Electrolux washing machine error E24 indicates a drain pump failure, often triggered by a fault in the sensing circuit of the drain pump triac or ... ✅ DIY Fixable

What Does Error E24 Mean?

The Electrolux washing machine error E24 indicates a drain pump failure, often triggered by a fault in the sensing circuit of the drain pump triac or a blockage in the drain system. During operation, you may notice unusual sounds and a failure to properly drain water. This error typically appears during or after a wash cycle, signaling that the internal diagnostics have detected a drainage issue.

Common Symptoms:

  • Error code appears during or after a wash cycle when draining water
  • Washer fails to drain water properly

Possible Causes

  • Faulty sensing circuit for the drain pump triac (electronic control issue) (medium)
  • Drain system problem such as blockage or pump issue triggering the error (medium)

How to Fix Error E24

DIY Fix Check and clear drain pathways

  1. Turn off and unplug the washer.
  2. Inspect and clean the drain pump filter (typically at the bottom front access panel).
  3. Check the drain hose for kinks, blockages, or improper placement.
  4. Run a short spin/drain cycle to see if the error clears.

Technician Only Test and repair electrical components of drain system

  1. Use a multimeter to test continuity and proper operation of the drain pump triac and associated wiring.
  2. Inspect and, if necessary, replace the main PCB if the sensing signal is faulty.
  3. Replace the drain pump if found to be defective.

Parts needed: Drain pump triac, Main PCB, Drain pump

🛑 When to Call a Pro:
  • If error persists after cleaning drain components and checking hose blockages.
  • If electrical testing reveals control board or pump triac failures beyond simple user-level fixes.

Technical Specifications

wattage 50W
component Drain Pump
resistance 10-30 ohms
part_number Electrolux 134051800
voltage_rating 120V AC

Common Questions

What does E24 error mean on electrolux washing machine?

E24 indicates a drain pump failure due to a fault in the sensing circuit or a blockage in the drain system.

Can I fix electrolux washing machine E24 error myself?

Yes, you can check and clean the drain pathways, including the pump filter and drain hose for blockages.

How much does it cost to fix E24 error?

Repair costs range from ¥15,000 to ¥50,000+, depending on parts and labor.

When should I call a technician for E24?

Call a technician if the error persists after cleaning drain components or if electrical testing indicates control board issues.

Data last verified: 2026-01-29

User Comments (0)

Share your experience or solution below.

Be the first to comment!