Electrolux Washing Machine Error E25

⚡ Quick Answer: The Electrolux washing machine error code E25 indicates a drainage issue, often leading to the machine stopping operation and displaying a drain error... ✅ DIY Fixable

What Does Error E25 Mean?

The Electrolux washing machine error code E25 indicates a drainage issue, often leading to the machine stopping operation and displaying a drain error message. This problem may be linked to a malfunctioning main control board (PCB) or a fault in the aqua control sensing system. Users may hear a loud humming noise as the machine struggles to drain properly.

Common Symptoms:

  • Washing machine displays E25 on the panel and may stop operation

Possible Causes

  • Main control board / PCB fault (low)
  • Aqua control sensing or related sensor fault (low)

How to Fix Error E25

DIY Fix Basic checks before service

  1. Turn off and unplug the washing machine.
  2. Wait a few minutes and restart the machine to see if the error code clears.
  3. Check for obvious issues such as water supply, hose kinks, or visible leaks.

Technician Only Diagnose control board and sensors

  1. Use service diagnostic mode (if available) to read error history and sensor statuses.
  2. Inspect wiring harnesses and connectors around the main control board.
  3. Test water sensing and pressure sensors for continuity and proper operation.
  4. Replace faulty control board or sensors as identified.

Parts needed: Main control board (PCB), Water level / aqua sensors, Wiring harnesses

🛑 When to Call a Pro:
  • If the error persists after simple restarts and basic checks
  • If you are not comfortable diagnosing electrical components

Next step

Choose the next step for E25

Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.

Based on diagnostic data

Most relevant component to inspect

Main Control Board

The central brain of the appliance that controls all components, cycles, and timings.

Typical part-only price
$120 - $280
DIY difficulty
Medium
Estimated time
20-40 mins
Where can I find the model number?

Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.

Find a part that fits my model

Verify the complete model and part number on the retailer's compatibility page before ordering.

Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.

Technical Specifications

wattage 60W
component Drain Pump
resistance 10-30 ohms
part_number EWMED70JSS
voltage_rating 120V AC

Common Questions

What does E25 error mean on electrolux washing machine?

E25 indicates a drainage issue, causing the machine to stop and display a drain error message.

Can I fix electrolux washing machine E25 error myself?

Yes, you can perform basic checks like restarting the machine and inspecting hoses for kinks or leaks.

How much does it cost to fix E25 error?

Repair costs vary but typically range from moderate to high, especially for PCB replacements.

When should I call a technician for E25?

Call a technician if the error persists after basic checks or if you're uncomfortable diagnosing electrical components.

Data last verified: 2026-01-29

User Comments (0)

Share your experience or solution below.

Be the first to comment!