Electrolux Washing Machine: making loud noise
What is this symptom?
Is your Electrolux washing machine making loud noises during operation? This common issue can stem from unbalanced loads, worn drum bearings, or foreign objects stuck in the drum. Addressing these concerns promptly can help maintain your machine's performance and longevity.
Important Tips for Electrolux Models
- Tub bearing and seal failures are frequently d as major noise causes; many guides recommend replacing the outer tub and bearing together due to complexity.
Possible Causes
Unbalanced load distribution
How to Identify: Noise occurs during spin but stops when load is balanced; drum seems to wobble.
Part: Drum/Tub assembly
Worn or damaged drum bearings
How to Identify: Deep rumbling or grinding mainly during spin, rough drum rotation by hand, noise increases over time.
Part: Drum bearing / Tub bearing
Foreign objects stuck in drum or pump
How to Identify: Clanking or rattling noises; small metal or hard object sounds; item visible or removable from drain pump or between tubs.
Part: Drum interior / Pump filter
Worn suspension (shock absorbers or springs)
How to Identify: Loud banging and shaking during spin; machine can ‘walk’ or shift on floor.
Part: Shock absorbers/Suspension rods
Drive belt or pulley wear
How to Identify: Squealing, slapping, or rhythmic banging noise; belt visibly cracked or loose.
Part: Drive belt / Drive pulley
Loose screws or internal parts
How to Identify: Noise correlates with vibration; rattling with no clear load imbalance; tighten accessible screws reduces noise.
Part: Cabinet screws / Internal fasteners
DIY Solutions
Balance the Load and Even Distribution
- Pause the cycle and open the washer door.
- Redistribute clothes evenly around the drum, avoiding heavy items on one side.
- Restart the cycle and observe if noise persists.
Check and Remove Foreign Objects
- Unplug washer from power.
- Inspect inside the drum for visible objects.
- If accessible, locate and open the drain pump filter and remove debris.
- Close filter access, secure any panels, then restore power and test.
Level the Washing Machine
- Use a spirit level on top of washer to check level horizontally and front‑to‑back.
- Adjust feet by screwing in/out until machine is stable and level.
- Recheck with level and run a test spin cycle.
Next step
Choose the next step for making loud noise
Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.
Most relevant component to inspect
Drum Bearing Kit
Supports the spinning drum and ensures smooth, quiet rotation during cycles.
- Typical part-only price
- $40 - $95
- DIY difficulty
- Hard
- Estimated time
- 120-180 mins
Where can I find the model number?
Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.
Verify the complete model and part number on the retailer's compatibility page before ordering.
Other parts options
Check related components first; use model search as a fallback.
Washer Shock Absorber
Dampens tub movement and vibration during high-speed spin cycles.
Washer Suspension Rod Kit
Supports and stabilizes the washer tub during agitation and spin.
Drive Belt
Transfers rotational power from the motor to turn the drum or tub.
Model-compatible Washing Machine parts
Enter the complete model number to browse compatible replacement parts. This is a model-based parts search, not a diagnosis that a specific component failed.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.
Optional routine care
Maintenance supplies
These products support cleaning or routine upkeep. They are separate from the possible repair components above and are not claimed to fix this error code or symptom.
Washing Machine Cleaner Tablets
Routine tub-cleaning supplies for residue and odor control. They do not repair a mechanical, drainage, or electronic fault.
Braided Washer Inlet Hoses
A maintenance replacement option for visibly worn external fill hoses. Verify thread size, length, and hot/cold connection requirements.
Washer Drain Hose Holder
Helps secure an external drain hose at the standpipe. It does not correct an internal pump or control fault.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. Recommendations are based on routine-care relevance, not commission rate.
Professional Repairs
Replace Drum Bearings and Seals
Replace Suspension/Shock Absorbers
Replace Drive Belt or Pulley
When to Call a Professional
Preventive Maintenance
-
Level and balance washer before each use: Noise from imbalance and excessive vibration
Frequency: Each use -
Clean drain pump filter regularly: Foreign object noise and pump damage
Frequency: Monthly
Frequently Asked Questions
Why is my Electrolux Washing Machine making loud noise?
How do I fix Electrolux Washing Machine making loud noise myself?
How much does it cost to fix making loud noise?
When should I call a technician for making loud noise?
References & Sources
- Washer is making loud or unusual noises Community
Community Analytical Insights
Guidance from available sources; statistical claims are shown only for samples of at least 10 discussions
Common Issues Reported by Users
- Worn or damaged bearings
- Foreign objects in the drum or pump
- Loose or damaged drive belt
User Suggested Solutions
-
Inspect and replace worn or damaged bearings. Disconnect the washing machine, remove the drum, and check the bearings for wear. Replace if necessary.
-
Check for foreign objects in the drum and pump. Open the door and inspect the drum for coins or small items. Remove any found objects and check the pump filter.
-
Examine and tighten or replace the drive belt. Remove the back panel, check the belt for wear or looseness, and replace if necessary.
Limited-source guidance; percentages and success-rate claims are not shown
View
Sources
Data compiled from real discussions on r/appliancerepair and r/Appliances:
Community Discussions
making loud noise during cycle
Priming the pumps may resolve the noise issue.
Source: Reddit r/appliancerepair
User Comments (0)
Share your experience or solution below.
Please login to post a comment.
Be the first to comment!